Storage; Troubleshooting - Silvercrest SDR 1100 B2 Operating Instructions Manual

■ If it is dirty, the removable fabric cover
with the symbols on the label:

Storage

Store the cleaned and dried appliance in a clean and dust-free location.

Troubleshooting

PROBLEM
The appliance is
not working.
No steam is
produced.
The green control
lamp
5
then goes out again.
The steam volume is
low.
Water drips from the
steam nozzle
■ 68 │ GB │ MT
The fabric cover
Do not bleach the fabric cover
Do not dry the fabric cover
Do not iron the fabric cover
POSSIBLE
The plug is not con-
nected.
The appliance is
damaged.
The water tank
empty.
The appliance is not yet
heated up.
This is not a fault: the
temperature dropped
for a short time and the
lights up and
appliance started heat-
ing up again.
The temperature is too
low.
The temperature is too
low.
.
6
can be cleaned in accordance
15
is machine washable at 60°C.
15
.
15
in a tumble dryer.
15
.
15
CAUSE
Connect the appliance to
a mains power socket.
Contact the Customer
Service department.
is Fill the water tank
3
water.
Wait until the green control
lamp
Wait until the appliance
has heated up again.
Wait until the appliance
has heated up again.
POSSIBLE
SOLUTIONS
with
3
lights up.
5
-
SDR 1100 B2