Related Manuals for Beko BM 5015 YX
Summary of Contents for Beko BM 5015 YX
- Page 1 BM 5015 YX - BM 5015 YB Document Number : 1728767309_AA_BEKO_BM 5015 YX_BM 5015 YB_EN/ 23-01-20.(12:30)
- Page 2 Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
-
Page 3: Table Of Contents
CONTENTS 1 INSTRUCTIONS FOR SAFETY adjustable service rack ..... 23 Lower basket bottle wire ....24 AND ENVIRONMENT Upper basket height adjustable rack 24 General safety ........4 Upper basket multipurpose service Intended use ..........4 rack ............24 Children’s safety ........5 Adjusting the height of the upper Disposing of packaging material ..5 basket .......... -
Page 4: Instructions For Safety And Environment
instructions for safety and environment This section contains safety wet hands! Never unplug by instructions that will help to get pulling on the cable, always protected from risk of personal pull out by grabbing the plug. injury or property damage. Failure The product must be •... -
Page 5: Children's Safety
instructions for safety and environment to be used in household and the product. similar applications such as: Do not forget to close the • - Staff kitchen areas in shops, door of the product when offices and other working leaving the room where it is environments;... -
Page 6: Compliance With Weee Directive And Disposing Of The Waste Product
instructions for safety and environment Compliance with RoHS 1. Unplug the product before transporting it. Directive 2. Remove water drainage and The product you have purchased water supply connections. complies with EU RoHS Directive 3. Drain the remaining water in (2011/65/EU). -
Page 7: Dishwasher Overview
Dishwasher Overview 1. Upper basket 2. Upper impeller 3. Lower impeller 4. Silverware basket 5. Door 6. Rating Label 7. Control panel 8. Detergent dispenser 9. Lower basket 10. Filters 11. Salt reservoir lid 12. Upper basket rail 13. Upper cutlery basket (depends on model) 14. -
Page 8: Fan Drying System
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label) -
Page 9: Installation
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be... -
Page 10: Connection To The Drain
Installation Permitted water temperature: For your safety, close the water up to 25°C ( 60°C for products inlet tap completely after the equipped with Aquasafe+; please washing programme is over. refer toAquasafe+ section ) Connection to the drain Water discharge hose can directly be Do not use old or used water inlet •... -
Page 11: Electrical Connection
Installation the feet of the product. Adjust the feet of If your dishwasher is equipped the product as illustrated in the installation with internal illumination, lamp manual supplied with the product. should only be replaced by the Dishwashers door must be Authorised Service Agent in aligned properly otherwise hot case of failures that may occur... -
Page 12: Preparation Tips For Energy Saving
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy- Washing, rinsing and drying performance efficient manner. of your dishwasher will improve when Wipe away any coarse food remnants on the water softening system is adjusted the dishes before putting them in the correctly. - Page 13 Preparation After detecting the water hardness: 1. After turning on the machine, press and hold Delayed Start and Programme keys simultaneously for 3 seconds to enter the settings menu. 2. Press the programme key until the Salt indicator starts to flash. Current regeneration stage is displayed on the programme indicator.
-
Page 14: Adding Salt
Preparation Firstly, take the lower basket out to add When moving, you will need softening salt. to set the water hardness level of your dishwasher again 2. Turn the salt reservoir lid counter- clockwise to open it (A). according to the information above, depending on the water hardness of the place you have moved to. -
Page 15: Detergent
Preparation You need to add salt right before Do not put solvents into the starting the machine. Thus, the detergent dispenser. There is overflowing salty water will be the risk of explosion! flushed immediately, preventing Put the detergent into the detergent the risk of corrosion in machine. -
Page 16: Tablet Detergents
Preparation Tablet detergents In addition to the conventional tablet detergents, there are also commercially available detergent tablets that show water softening salt and/or rinse aid effect. Some types of these detergents contain special- purpose components such as glass and stainless steel protectors. These tablets show their effects up to a certain water 3. -
Page 17: Rinse Aid
Preparation When you switch to powder 2. Fill the reservoir until “MAX” level. detergent from tablet detergent: Make sure that salt and rinse aid reservoirs are full. 2. Set the water hardness to the highest level and perform an empty run. 3. -
Page 18: Items Not Suitable For Washing In The Dishwasher
Preparation Items not suitable for Placing the dishes into the washing in the dishwasher dishwasher Never wash dishes soiled by cigarette You can use your dishwasher in the • ash, candle remnants, polish, dyestuff, optimum way with respect to energy chemicals, etc. - Page 19 Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware 19 / 43 EN...
-
Page 20: Cutlery Basket
Preparation Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash your Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an dishes such as knife, fork, spoon, etc. in an efficient manner. -
Page 21: Collapsible Lower Basket Tines
Preparation Collapsible lower basket Bringing the tines to the tines horizontal position by holding them from the tips may cause (depends on model) them to bend. Therefore, it There are foldable tines (A) located at the will be appropriate to bring the tines in the middle to horizontal lower basket of the machine are designed or vertical position by holding... -
Page 22: Tray Wash Supports
Preparation SoftTouch Accessory (depends on model) The SoftTouch Accessory found in the lower basket of your machine enables a safe washing for your fragile glasses. Bringing the tines to the horizontal position by holding them from the tips may cause them to bend. -
Page 23: Lower Basket Multipurpose / Height
Preparation Lower basket multipurpose Make sure that the impeller / height adjustable service does not touch the dishes you rack placed on the racks. (depends on model) To close the racks: This accessory located at the lower basket Fold the rack (A). of your machine allows you to easily wash 2. -
Page 24: Lower Basket Bottle Wire
Preparation Lower basket bottle wire (depends on model) The bottle wire is designed for easier washing of long pieces with wide mouths. You may take out the bottle wire from the basket when not in use by pulling it out from both sides (H). -
Page 25: Adjusting The Height Of The Upper Basket
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B). -
Page 26: Collapsible Upper Basket Wires
Preparation Collapsible upper basket Pull the basket out completely. Place the basket back into the tracks at the wires desired height. (depends on model) Push the latches back into the correct You can use collapsible wires when you position. need a larger space for your dishes in the upper basket of your machine. -
Page 27: Ceiling Cutlery Basket
Preparation Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc. -
Page 28: Operating The Product
Operating the product On/Off key 2. Display 3. Start/Pause/Cancel key 4. Time Delay key 5. Function keys Half Load function Super Rinse Function 6. Program Selection key 7. Programme indicator 8. Program Follow-up indicator 9. Start ( )/Pause indicator 10. Time Delay indicator 11. -
Page 29: Keys
Operating the product Keys Programme selection On/Off key Press On/Off key to turn on your It is used to turn on or off the machine. machine. Machine will turn on with economy 2. Refer to the table of "Programme data programme in On mode and the number of and average consumption values"... - Page 30 Operating the product /43 EN...
-
Page 31: Auxiliary Functions
Operating the product Auxiliary functions 2. Turn the machine on with On/Off key. 3. Select the desired programme and Washing programmes of your dishwasher press the Half Load key. are designed to obtain the best cleaning effect, considering the type of the soiling, While the function is enabled, the Half Load soiling degree and properties of the dishes indicator will become on in the function... -
Page 32: Scheduling The Washing Time
Operating the product Scheduling the washing Floor illumination Warning to show that machine is time in washing phase Time Delay (depends on the model) If an economical electricity tariff is applied Your machine reflects a light to the floor in your region, you can use the Time during the washing process. -
Page 33: Starting The Programme
Operating the product Starting the programme To exit time delay mode without activating the Time To start your machine after selecting the Delay, press the time delay key programme and auxiliary functions, press until the 3-6-9 hours duration Start/Pause/Cancel key. indicators disappear. -
Page 34: Cancelling The Programme
Operating the product Cancelling the programme Adjusting the amount of Press Start/Pause/Cancel key for 3 rinse aid seconds to cancel the programme. After turning on the machine, press 2. Release the key when the programme and hold Time Delay and P keys indicator starts flashing. -
Page 35: Water Cut-Off Warning
Operating the product Leave your dishes in the machine for about 15 minutes to allow them cool down after they are washed. Your dishes will dry in a shorter time if you leave the door of your machine ajar during this period. This process will increase the drying effectiveness of your machine. -
Page 36: Maintenance And Cleaning
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters. -
Page 37: Cleaning The Hose Filter
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose. -
Page 38: Cleaning The Impellers
Maintenance and cleaning Cleaning the impellers Upper impeller Clean the impellers at least once a week in Check if the holes on the upper impeller (1) order for the machine operates efficiently. are clogged. If they are clogged, remove and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller. -
Page 39: Troubleshooting
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •... - Page 40 Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
- Page 41 Troubleshooting the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour.
- Page 42 Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
- Page 43 Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.