Sony LF-B20 Settings Manual page 8

Creating Basic Settings for
the LocationFree Player
(Registering at Home)
You can register your PSP
Station and set to connect to a wireless LAN.
When you connect your PSP
Station directly or via your router, set up
according to the following procedures.
1
Turn on the WLAN switch of the PSP
system.
2
Select under
menu, and then press the
The setting screen for use of LocationFree
Player is displayed. Press the right button to
go to the next screen.
z
Tip
To re-register your PSP
Station or to register your system with another
Base Station, you must perform [Basic Settings]
again (1 page 21).
system with the Base
®
system to the Base
®
®
from the home
button.
system with the Base
®
3
Select [Start], and then press the
button.
4
Press the SETUP MODE button on the
rear (LF-PK1/LF-X11) or front (LF-
B20/LF-B10) of the Base Station.
With the Base Station turned on, press and
hold the button until the SETUP MODE
LED starts to blink.
LF-PK1/LF-X11
SETUP MODE
The SETUP MODE LED blinks.
LF-PK1/LF-X11
SETUP
MODE LED
Wait while the PSP
the Base Station and the network settings
required for establishing a connection are
completed. This is an automatic process.
8
LF-B20/LF-B10
WIRELESS
SETUP MODE
NETWORK
SETUP MODE/
NET AV
SETUP MODE
RESET
LF-B20/LF-B10
SETUP MODE/
NET AV
WIRELESS
SETUP
NETWORK
SETUP MODE/
MODE/
NET AV
SETUP MODE
NETAV LED
RESET
system registers with
®