When you perform registration via the Internet,
create the settings with the following procedures.
Preparing the file for device
registration
Note
To prepare the device registration file, you need a
computer installed with LocationFree Player.
1
Download a file for device
registration from the settings screen
of the Base Station LF-B20/LF-B10.
For details, refer to"Base Station Settings" -
"Making Advanced Settings for the Base
Station" - "Device Registration" on the
Operating Instructions document supplied
with the Base Station LF-B20/LF-B10.
2
Create a folder on Memory Stick
Duo™ as shown below, and then
copy the downloaded file to the folder
"REGISTER" on the Memory Stick
Duo™.
MSSONY
Creating Basic Settings for the
LocationFree Player (Registering
via the Internet)
1
Set Memory Stick Duo™ which
contains the file for device
registration into your PSP
2
Turn on the PSP
on the WLAN switch.
3
Select
under
menu, and then press the
The settings screen for using the
LocationFree Player is displayed. Press the
right button to display the next screen.
LF
REGISTER
system.
®
system, and switch
®
from the home
button.
4
Select [Start], and then press the
button.
z
Tip
When the Memory Stick Duo™ which contains
the file for device registration is set into the PSP
system, the system always uses the file to
complete the registration.
5
Select the network connection, and
then press the
When you are connecting to the access point
for the first time, refer to the instruction
manual supplied with the PSP
6
Check the settings status.
Press the
button to complete the settings.
A list of network settings is displayed.
7
Select the network connection, and
then press the
A connection is established with the Base
Station via the selected access point.
22
®
button.
system.
®
button.