Creating Additional Service Templates - Sony CLIE PEG-S320 Operating Instructions Manual

Changing the Network preferences
1 Enter the telephone number used to access the modem.
If needed, enter a dial prefix (such as "9") to access an outside line,
and then tap the Dial prefix check box. You can enter a comma in
the field to introduce a "pause" in the dialing sequence. Each
comma equals a two second pause.
2 If the phone line you're using for your CLIE handheld has Call
Waiting, select the "Disable call waiting" check box to avoid an
interruption during a modem HotSync operation or accessing a
Web Clipping site.
Note
Each telephone company assigns a code to disable Call Waiting. Contact your
local telephone company for the code that is appropriate for you.
3 If you want to use a calling card to place the call, select the "Use
calling card" check box and enter the calling card number.
Tip
There is usually a delay before you enter your calling card number. It's a
good idea to add at least three commas before your calling card number to
compensate for the cue delay.
4
Tap OK.

Creating additional service templates

You can create additional service templates from scratch or by duplicating
existing templates and editing information. After you create a new or
duplicate template, you can add and edit settings.
To add a new service template
1
On the Network Preferences screen, tap the Menu
2
Tap New from the Service menu.
An Untitled service template is added to the drop-down list for the
Service field.
Chapter5
Customizing your Sony CLIE Handheld (Preferences)
icon.
188