Table of Contents
Advertisement
Control buttons and display panel
The buttons are used to set different additional functions. The
set values are shown on the display panel.
Button
Rapid heating
c
Time functions
0
Childproof lock
D
Minus
A
Plus
@
The symbol for the time function is in brackets [ ] on the display
panel.
Temperature control knob
The temperature control knob is used to select the temperature
or the grill power level.
Setting
Zero setting
Ú
50-270 Temperature
range
I,II and
Grill power
III.
Your accessories
The accessories supplied with your appliance are suitable for
making many meals. Ensure that you always insert the
accessories into the cooking compartment the right way round.
There is also a selection of optional accessories, with which
you can improve on some of your favourite dishes, or simply to
make working with your oven more convenient.
inserting the accessories
The accessories can be placed inside the oven on 5 different
levels. Always insert them as far as possible so that the
accessories do not touch the door glass.
The accessories can be removed halfway until they are
secured. This makes it easy to remove food.
Use
Heats the oven particularly quickly.
Select the timer
, the cooking
U
time
r
, the end time
p
and the
time
.
0
Blocks and unblocks the control
panel.
Reduces programmed values.
Increases programmed values.
Meaning
The oven does not heat up.
The oven's temperature in ºC.
The power levels of the small sur-
face grill
and large surface
*
grill
(
.
I = level 1, low
II = level 2, medium
III = level 3, high
When the oven is heating, the
display panel. This light goes off when heating is paused. The
symbol does not come on with the light function
defrost function
B
.
Note: If grilling for more than 15 minutes, turn the temperature
control knob to the low setting.
Inside the oven
There is a light inside the oven. A fan prevents the oven from
overheating.
Fan
The fan can be turned on and off as necessary. The hot air
escapes through the top of the door. Warning! Do not cover the
vent. The oven could overheat.
The fan remains on for a certain length of time after the oven
has been switched off so that it can cool down more quickly.
Light
The oven light remains on while the oven is working. However,
the light can be turned on without the oven being on by setting
the function control knob to
When inserting an accessory in the oven, make sure the
curvature is at the rear. This is the only way to ensure it fits
perfectly.
Depending on the equipment, if the appliance has guide rails,
these will interlock slightly when fully removed. This means the
accessory can be easily inserted. To unlock, reinsert the guide
rails in the oven exerting slight pressure.
Note: Accessories may deform as they heat up. This
deformation will disappear when they cool. This does not affect
the normal operation.
t
symbol lights up on the
^
or the
.
^
5
Advertisement
Table of Contents
