Table of Contents
Advertisement
efesotomasyon.com -Toshiba inverter,drive,servo,plc
1) 0-10Vdc voltage input adjustment
VI terminal
2) 4-20mAdc current input adjustment
VI terminal
3) 0-5 Vdc voltage input, or used to adjust external volume (P5-VI-CC)
VI terminal
* When using the P5 terminal of the inverter and installing an external potentiometer, low voltage may occur
because of the resistance of the connection. When up to the frequency set at cannot be output,
adjust .
50/60 (Hz)
0 ( Hz)
0 (%)
0
Frequency commnd
50/60 (Hz)
0 ( Hz)
20 (%)
4
Frequency commnd
f204
50/60 (Hz)
0( Hz)
100(%)
0(%)
? 5 V voltage signal
0V
F-13
Point settings adjust the
frequency command for the
voltage input.
Gradient and bias can be set
easily.
=
(Voltage input: 0-10V)
100 (%)
10V voltage signal
Point settings adjust the frequency
command for the current input.
Ramp and bias can be easily set.
With a current input of 0 to 20 mA,
set to .
=
(Current input: 4-20 mA)
100 (%)
20mA current signal
Point settings adjust the
frequency command for
the voltage input.
Ramp and bias can be
easily set.
=
(Voltage input: 0-5V)
E6581595
6
Advertisement
Table of Contents
