Related Manuals for Beko WTE 10734 XS0ST
Summary of Contents for Beko WTE 10734 XS0ST
- Page 1 Washing Machine User Manual WTE 10734 XS0ST Document Number= 2820525363_EN/ 27-02-16. ( 15:55)
- Page 2 Dear Customer, Please read this user manual first! Thank you for preferring a Beko product. We hope that you get the best results from our product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
-
Page 3: Table Of Contents
CONTENTS 1 General safety instructions 1.1 Children's safety ...........................5 1.2 Product safety ..........................6 1.3 Electrical safety..........................6 1.4 Hot surface safety ........................7 1.5 Other ..............................7 2. Instructions for environmental protection 2.1 Compliance with WEEE Directive ..................8 2.2 Disposing of the waste product ................... 8 2.3 Package information ......................... - Page 4 8.4.8 Using starch ............................28 8.4.9 Using limescale remover ........................28 8.4.10 Using bleaches ........................... 28 9. Programmes and auxiliary functions 9.1 Programme selection ......................29 9.2 Programmes ..........................30 9.3 Programme table ........................35 9.4 Auxiliary function selection ....................37 9.5 Auxiliary functions ........................38 10.
-
Page 5: General Safety Instructions
General safety instructions 1.1 Children's safety • Children under the age of should be kept away unless continuously supervised. • This product can be used by children at and WARNING! above years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and... -
Page 6: Product Safety
1.2 Product safety • Unplug the product when not in use. • Always have the repairing procedures carried out by the Authorised Service Agent. WARNING! • Do not force open the locked loading door. Door can be opened a few minutes after the washing cycle ends. -
Page 7: Hot Surface Safety
1.4 Hot surface safety • The glass of the loading door gets too hot while washing at high temperatures. Therefore, especially do not allow children touch the glass while washing. WARNING! 1.5 Other • Do not use combustible, flammable and other similar chemicals for product cleaning or other purposes. -
Page 8: Instructions For Environmental Protection
2. Instructions for environmental protection 2.1 Compliance with WEEE Directive This product does not contain harmful and forbidden materials described in the "Regulation on the Control of the Waste Electrical and Electronic Equipment" issued by T.R. Ministry of Environment and Urbanization. It complies with the WEEE Directive. -
Page 9: What You Can Do For Energy Saving
2.4 What you can do for energy saving • Comply with the information in the programme and consumption table section. - If the washing machine is overloaded, its washing performance will drop. CAUTION! - Moreover, noise and vibration problems may occur. Following information will help you use the product in an ecological and energy-efficient manner. -
Page 10: Intended Use
Intended use a) This product has been designed for domestic use. b) It is not suitable for commercial use and it must not be used for anything other than its intended use. c) Suitable for textile washable in washing machines. d) The manufacturer waives any responsibility arisen from incorrect usage or transportation. -
Page 11: Your Product
4. Your product 4.1 Overview 1- Power cable 2- Top panel 3- Control panel 4- Water discharge hose 5- Loading door 6- Filter cap 7- Adjustable feet 8- Detergent drawer EN / 11 Washing Machine / User’s Manual... -
Page 12: Package Contents
4.2 Package contents Power cable Water discharge hose Transportation safety bolts Mains water inlet hose Liquid detergent container User manual Plastic plug group • Figures in this manual are schematic and may not match the product exactly. NOTE EN / 12 Washing Machine / User’s Manual... -
Page 13: Control Panel
4.3 Control panel Programme selection knob 2 - Spinning level adjustment button 3 - Temperature level adjustment button 4 - Display 5 - End Time adjustment button 6 - Soiling Level adjustment button On / Off button 8 - Start / Pause button 9 - Auxiliary Function buttons 10 - Programme selection lights EN / 13... -
Page 14: Screenshot
4.4 Screenshot Temperature indicator 2 - Temperature symbol 3 - No water symbol 4 - Programme follow-up indicator 5 - Soiling level indicator 6 - Duration information Auxiliary functions light 8 - Child lock enabled symbol 9 - Auxiliary functions light 10 - Delayed start enabled symbol 11 - Door lock is engaged symbol 12 - Auxiliary functions light... -
Page 15: Technical Specifications
5.Technical specifications Complying Commission Delegated Regulation (EU) No 1061/2010 Supplier name or trademark Beko Model name WTE 10734 XS0ST Rated capacity (kg) Energy efficiency class / Scale from A+++ (Highest Efficiency) to D (Lowest Efficiency) A+++ Annual Energy Consumption (kWh) Energy consumption of the standard 60°C cotton programme at full load (kWh) -
Page 16: Installation
6. Installation 6.1 Appropriate installation location • Damaged products cause risks for your safety. - Prior to installation, visually check if the product has any defects on it. WARNING! - If so, do not have it installed. • Do not place the product on a floor without sufficient capacity to carry the load. -
Page 17: Removing Packaging Reinforcement
6.2 Removing packaging reinforcement • Seek someone's help for this procedure. - Risk of getting injured. CAUTION! To remove the packaging reinforcement; a) Tilt the product backwards. b) Remove the packaging reinforcement by pulling the ribbon. EN / 17 Washing Machine / User’s Manual... -
Page 18: Removing Transportation Safety Bolts
6.3 Removing transportation safety bolts • Remove the transportation safety bolts before operating the product! - Otherwise, the product will be damaged. CAUTION! a) Loosen all transportation safety bolts with an appropriate wrench until they turn freely (C). b) Remove transportation safety bolts by turning them gently. -
Page 19: Connecting Water Supply
6.4 Connecting water supply • The water supply pressure required to run the product is between 1 to 10 bars (0.1 – 1 MPa). (It is necessary to have 10 – 80 litres of water flowing from the fully open tap per minute.) CAUTION! - Attach a pressure reducing valve if water pressure is... -
Page 20: Connecting The Water Draining Hose To The Drain
6.5 Connecting the water draining hose to the drain • Attach the end of the drain hose directly to waste water drain, washbasin or bathtub. • Do not contact the discharged water. Risk of being burnt as the water may be hot. CAUTION! •... -
Page 21: Adjusting The Feet
6.6 Adjusting the feet • Adjust feet so that the product will be balanced on the location it will be used. - Balance the machine by adjusting the feet. CAUTION! - Check for any play by pressing the product from upper diagonal edges. -
Page 22: Electrical Connection
6.7 Electrical connection • Damaged power cables must be replaced by the Authorised Service Agents. DANGER! a) Connect the product to a grounded outlet protected by a 16 A fuse. • Our company shall not be liable for any damages that will arise when the product is used without grounding in NOTE accordance with the local regulations. -
Page 23: Initial Use
7. Initial use 7.1 Drum cleaning • Apply drum cleaning without any laundry in the product. NOTE a) Use the Drum Cleaning programme. b) Set the temperature to the level recommended on the special drum cleaning agent package which can be provided from Authorised Service Agents. -
Page 24: Preparing To Wash
8. Preparing to wash 8.1 Sorting the laundry a) Sort laundry according to type of fabric, colour, and degree of soiling and allowable water temperature. b) Follow instructions on the garment tags. c) Do not wash colours and whites together. New and dark coloured cottons may release a lot of dye. -
Page 25: Preparing Laundry For Washing
8.2 Preparing laundry for washing a) Remove the metal pieces such as support wire, belt buckle or metal buttons or wash the clothes by putting them in a laundry bag or pillow case. b) Take out all substances in the pockets such as coins, pens and paper clips, and turn pockets inside out before washing. -
Page 26: Using Detergent
8.4 Using detergent 8.4.1 Detergent drawer The detergent drawer is composed of three compartments: – (1) for prewash – (2) for main wash – (3) for softener – ( ) in addition, there is a siphon piece in the softener compartment. 8.4.2 Detergent, softener and other cleaning agents a) Add detergent and softener before starting the washing programme. -
Page 27: Adjusting Detergent Amount
a) Use different detergents for coloured and white laundry. b) Wash your delicate clothes only with special detergents (liquid detergent, wool shampoo, etc.) used solely for delicate clothes. c) When washing dark coloured clothes and quilts, it is recommended to use liquid detergent. d) Wash woolens with special detergent manufactured specifically for woolens. -
Page 28: Using Softeners
8.4.7 Using softeners a) Pour the softener into the softener compartment of the detergent drawer. b) Do not exceed the (>max<) level marking in the softener compartment. c) If the softener has lost its fluidity, dilute it with water before adding it in the detergent compartment. -
Page 29: Programmes And Auxiliary Functions
9. Programmes and auxiliary functions 9.1 Programme selection • Programmes are limited with the highest spin speed appropriate for that particular type of fabric. NOTE • When selecting a programme, always consider the type of fabric, colour, degree of soiling and permissible water temperature. -
Page 30: Programmes
9.2 Programmes • You can see laundry type and washing suggestions on clothing tags. NOTE • Katoen Eco (Cotton Economic) Use to wash your normally soiled, durable cotton and linen laundry. Although it washes longer than all other programmes, it consumes less energy and water. - Page 31 • BabyProtect+ Use to wash laundry of the allergic individuals and laundry that require hygienic washing (baby clothes, sheet, bedding, underwear, etc.). Programme period is longer and clothes are washed intensely at high temperature. BabyProtect+60°C programme is tested and approved by “The British Allergy Foundation”...
- Page 32 •Daily Xpress Use to wash your lightly soiled and unstained cotton laundry in a short time. • Self Clean • This is not a Laundry washing programme. It is a maintenance programme. • Do not run this programme when there are any objects in CAUTION! the machine.
- Page 33 You can find stain groups based on dirt level below: Sweat Collar soil Meal Mayonnaise Heavily Soiled Salad dressing Make-up Machine oil Baby food Blood Chocolate Pudding Grass Medium Soiled Butter Curry Coffee Fruit juice Ketchup Lightly Soiled Red wine Starch Coal •...
- Page 34 • Dekbed (Duvet (Bedding)) • Do not wash your duvets, pillows and etc. that contain cotton and wool in the machine. NOTE • Do not load more than 1 double fiber duvet (200 x 200 cm). Use to wash your fiber (synthetic) duvets that bear "machine washable" tag.
-
Page 35: Programme Table
9.3 Programme table Selectable temperature Programme range °C 60** 0.96 1400 60-Cold Katoen Eco 60** 0.75 1400 60-Cold 40** 0.75 1400 60-Cold 2.50 1400 • • • Cold-90 Katoen 1.50 1400 • • • Cold-90 1.00 1400 • • • Cold-90 1.40 1200... - Page 36 ** “Cotton Economic 40°C" and "Cotton Economic 60°C" are standard programmes. These programmes are known as ‘40°C cotton standard programme’ and ‘60°C cotton standard programme’ and indicated with the symbols on the panel. • Water and power consumption may vary from the above table subject to the changes in water pressure, water NOTE hardness and temperature, ambient temperature, type and...
-
Page 37: Auxiliary Function Selection
9.4 Auxiliary function selection • When you try to change an auxiliary function that is not allowed to be selected with the current programme, NOTE indicator light of the relevant auxiliary function will not flash, only an audio warning is given. Frames of available options will be lit. -
Page 38: Auxiliary Functions
9.5 Auxiliary functions • Voorwas (Prewash) A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water, detergent and time. • Extra Spoelen (Rinse Plus) This function enables the product to make another rinsing in addition to the one already made after the main wash. -
Page 39: Programme Setting
10. Programme setting 10.1 Temperature selection a) Whenever a new programme is selected, the recommended temperature for the selected programme appears on the temperature indicator. b) To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease gradually. c) It turns back to the beginning after "Cold" option and arrives at the highest temperature selectable according to the programme. -
Page 40: Soiling Level Selection
• Rinse Hold If you are not going to unload your clothes immediately after the programme completes, you can use rinse hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there is no water in the machine. -
Page 41: Starting The Programme
10.4 Starting the programme a) Press Start / Pause button to start the programme. b) Programme follow-up light showing the startup of the programme will turn on. 2 45 10.5 Programme steps a) The symbols below appear on programme follow-up indicator after the programme starts. -
Page 42: End Of Programme
10.6 End of programme a) "End" symbol appears on the display when the programme is complete. 2 45 • If you do not press any button for 10 minutes, the product will turn off automatically. Display and all indicators are NOTE turned off. -
Page 43: Programme Options
11. Programme options 11.1 Setting the end time • Do not use liquid detergents without a liquid cup when you activate End Time function. There is the risk of staining of NOTE the clothes. • When the End Time selection is completed, the time appears on the display is the the end time chosen plus the duration of the selected programme. -
Page 44: Cancelling The End Time Setting
Adding laundry during End Time countdown. a) Press the Start / Pause button. b) Wait for loading door to get unlocked. The door symbol disappears when the door is unlocked. c) Open the loading door and add laundry. d) Close the loading door. f) Press the Start / Pause button. -
Page 45: Child Lock
11.2 Child lock Use Child Lock function to prevent children from tampering with the product. Thus you can avoid any changes in a running programme. • You can switch on and off the product with On / Off button when the Child Lock is active. When you switch on the NOTE product again, programme will resume from where it has stopped. -
Page 46: Switching The Machine To Pause Mode
11.3 Switching the machine to pause mode a) Press the Start/Pause button to switch the machine to pause mode while a programme is running. b) Start/Pause light and the programme step light in the programme follow-up indicator will start flashing. c) Loading door symbol will continue flashing until the loading door is unlocked. -
Page 47: Additional Features
12. Additional features 12.1 Activating and deactivating the audio warning a) Press and hold 1st and 2nd auxiliary function buttons for 3 seconds to activate and deactivate the audio warning. b) Programme selection display on the panel will count down as “3, 2, 1”. -
Page 48: Maintenance And Cleaning
13. Maintenance and cleaning 13.1 Cleaning the detergent drawer • Clean the detergent drawer at regular intervals (every 4-5 washing cycles) as shown below in order to prevent NOTE accumulation of powder detergent in time. • If more than normal amount of water and softener mixture starts to gather in the softener compartment, the siphon must be cleaned. -
Page 49: Cleaning The Water Intake Filters
13.4 Cleaning the water intake filters There is a filter at the end of each water intake valve at the rear of the product and also at the end of each water intake hose where they are connected to the tap. These filters prevent foreign substances and dirt in the water to enter the product. -
Page 50: Cleaning The Pump Filter
13.5 Cleaning the pump filter • Foreign substances left in the pump filter may damage your product or may cause noise problem. • In regions where freezing is possible, the tap must be closed, system hose must be removed and the water inside CAUTION! the product must be drained when the product is not in use. - Page 51 c) Proceed as follows for draining water. - Pull the emergency draining hose out from its seat. - Place a large container at the end of the hose. Drain the water into the container by pulling out the plug at the end of the hose.
-
Page 52: Troubleshooting
14. Troubleshooting Problem Cause Solution Programs do not Start / Pause / Cancel button is • Press Start / Pause / Cancel button. not pressed. start after the loading door is closed. Programme cannot The product has switched to • The programme is cancelled when the self protection mode due to a product is turned off and on again. - Page 53 Problem Cause Solution Loading door cannot Loading door lock is activated • Drain the water by running the Pump or Spin programme. because of the water level in be opened. the product. Product is heating up the • Wait until the programme completes. water or it is at the spinning cycle.
- Page 54 Problem Cause Solution Product does not There is unbalanced load in the • Automatic unbalanced load detection system is activated due to the product. switch to spinning unbalanced distribution of the laundry in step. (*) the product. The product will not spin •...
- Page 55 Problem Cause Solution Colour of the clothes Excessive laundry was loaded • Do not load the product in excess. faded. (**) Detergent in use is damp. • Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures. A higher temperature was •...
- Page 56 Problem Cause Solution Detergent residue Detergent was put in wet • Dry the detergent drawer before putting in detergent. drawer. in the detergent drawer. (**) Detergent has gotten damp. • Keep detergents closed in an environment free of humidity and do not expose them to excessive temperatures.
- Page 57 Problem Cause Solution (*) The product does not switch to spinning step when the laundry is not evenly distributed in the drum to prevent any damage to the product and to its surrounding environment. Laundry should be rearranged and re-spun. (**) Regular drum cleaning is not applied.
- Page 60 www.beko.com...