Data Logs - Pioneer V050-PPI-01 Owner's Manual

OPERATION

Data Logs

Data Logs
Data logging is automatically enabled if an SD card is inserted into the back of the touch screen. Units ship
with an SD card installed. To download files off of the SD card, refer to
load" on page 33.
Four data logs are shown on the first Data Logging screen. These are for Analog sensors 1, 2, 3, and 4. Data can
be scrolled using the buttons on the right side of each dataset.
• To navigate to the screen, select the Data Logs icon on the Home screen. Refer to
tion" on page 11.
Screen 2 includes logs for current, voltage, RPM, and VFD IGBT Temperature.
• To navigate to the screen, select the Data Logging 2 button on the first data logging screen.
1. Remove SD Card button: press before removing the SD card from the HMI to discontinue writing.
2. Remove USB button: If using a USB with the SmartPrime HMI, press before removing the USB from the
HMI to discontinue writing.
3. Press the Data Logging 2 button to advance to the second logging screen.
• The Data Logging 2 has a button to go back to the Data Logging screen.
30
"SD Card Data & Alarm Log Down-
1 2
"Home Screen Naviga-
3