Advertisement
PRODUCT INFORMATION
Description
Pioneer ElectricPAKs include a rigidly mounted electric motor and Pioneer pump in either a Pioneer prime
or a standard centrifugal configuration supported by a modular frame intended for fixed installations. The
rigid mount between pump and motor maintains coupling alignment during transportation and operation,
increasing the time between coupling inspections.
For portable applications, drag skid, lifting bail, and quick connect junction box accessories are available.
The drag skid adder is highly recommended.
Refer to the motor manuals and applicable guides for startup, installation, and maintenance. The package
as a whole is not under the same warranty. For warranty information, please see the owner's manual of each
component.
UNPACKING & INSPECTION
Risk of severe injury or death.
•
When lifting or moving heavy components, use suitable lifting equipment, in good condition, rated for at least 5 times the
weight of the materials being moved.
•
Ensure forklift fork/tines are fully inserted. Failure to do so can lead to product damage, and/or the unit to fall off the forklift
and cause injury or death.
•
Use only labeled tie down points to secure unit for transportation. Failure to use labeled tie down points could lead to
equipment damage and/or allow unit to come loose during transit and cause injury or death.
Risk of damage to equipment.
•
The pump package must be transported in a level, horizontal position and secured using the identified tie-down points.
•
If the pump package is dropped, impacted, or otherwise mishandled, malfunction can occur.
Transportation and Storage
Normal packaging is designed to protect the pump during shipment and for storage up to three months. It
is recommended to store the unit in a clean, dry place, protected from the environment, dirt, and debris.
IMPORTANT: See manufacturer's recommendations for motor, panel, and pump storage.
1.
Ensure the bearings are packed with recommended grease or coated with oil to prevent moisture from
entering the bearing housings.
2. Ensure the suction and discharge flanges are covered to prevent entry of debris.
3. Periodically check oil levels.
4. For cold weather storage, fully drain casing prior to storing.
Unpacking
1.
Check for missing and damaged parts. Immediately report any issues to the transport company and
equipment manufacturer.
NOTE: Parts and/or accessories are sometimes individually wrapped or fastened to the equipment.
2. Examine the pump and motor unit upon arrival for shipping damage.
•
If there is damage, notify the shipping agent and your sales representative.
PRODUCT INFORMATION
Description
3
Advertisement
