Table of Contents
Advertisement
CAUTION!!!
If equipment is stored more than twelve (12) months, some of the components or lubricants
may have exceeded their maximum shelf life. These must be inspected and replaced as
necessary prior to pump operation to ensure proper pump performance.
RECORDING MODEL & SERIAL NUMBERS
Record the model and serial number for your Pioneer Pump in the spaces provided below.
The factory will need this information when you require parts or service.
Pump Model: _______________________________________
Pump Serial Number: ________________________________
Engine/Motor Serial #: _______________________________
Engine/Motor Mgf: __________________________________
Pioneer Pump's current terms and conditions, including limited warranty policy, can be found
on our website
http://www.pioneerpump.com
Resources > Terms and Conditions or by following this link:
http://pioneerpump.com/media/232391/M5132_Pioneer_Standard_Terms_and_Conditions-1-
.pdf
WARRANTY CLAIMS
Contact the factory to file a warranty claim, before shipping parts back. Parts returned to the
factory without an RMA number on file will be scrapped upon arrival.
SAFETY INFORMATION
These warnings apply to PB Series basic pumps. In many cases, Pioneer Pump, inc. has no
control over or particular knowledge of the power source that will be used. Therefore, refer to
the manual accompanying the power source before attempting to begin operation.
WARNING!!!
Before attempting to open or service the pump:
1. Familiarize yourself with this manual.
2. Disconnect or lock out the power source to ensure that the pump will remain
inoperative.
3. Check the temperature before opening any covers, plates or plugs.
4. Allow the pump to cool if overheated.
5. Close the suction and discharge valves.
6. Vent the pump slowly and cautiously.
7. Drain the Pump.
WARRANTY INFORMATION
from the homepage by selecting More >
4
Advertisement
Table of Contents
