Using the Auto Fan Function
The fan speed is adjusted automatically
according to the contamination level of indoor air.
Press the Standby On/Off button to turn the
1
product on.
Press the Auto Fan button.
2
• Au is displayed shortly on the status panel.
Using the Turbo Function
It sets the fan speed of the air purifier to Turbo to
circulate indoor air fast.
Press the Standby On/Off button to turn the
1
product on.
Press the Turbo button on the remote
2
controller.
• Po is displayed shortly on the status panel.
NOTE
• When Turbo is set as the fan speed, the fan
speed will be set automatically according to the
status of air quality 30 minutes later.
• If you press the Turbo button or the Speed
button to cancel the turbo function while using
the turbo function, the fan speed will revert to
the previously set fan speed.
USING
25
SG