16
en | System overview
–
–
–
–
3.3.3
Drive carrier LEDs
Your chassis uses SATA drives. Each SATA drive carrier has two LEDs.
–
–
2016.08 | V2.1 | DOC
NiC2: A flashing LED indicates network activity on GLAN2.
NIC1: A flashing LED indicates network activity on GLAN1.
HDD: A flashing LED indicates IDE channel activity in the SAS/SATA drive, SCSI
drive, and/or DVD-ROM drive activity.
Power: Indicates power is being supplied to the system's power supply units.
This LED should normally be illuminated when the system is operating.
Green: Each SATA drive carrier has a green LED. When illuminated, this green LED (on
the front of the SATA drive carrier) indicates drive activity. A connection to the SATA
backplane enables this LED to blink on and off when that particular drive is being
accessed.
Red: The red LED indicates a SATA drive failure. If one of the SATA drives fail, you should
be notified by your system management software.
Installation Manual
DIVAR IP 6000 (2U)
Bosch Sicherheitssysteme GmbH