Toro Groundsmaster 360 Operator's Manual page 18

1. From the M M
AIN ENU
scroll down to the S
right button (Figure
Figure 9
2. In the S M
ETTINGS
scroll down to the P
the right button (Figure
Figure 10
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(Figure 10B and Figure
until the last digit is entered and press the right
button once more.
4. Press the middle button to enter the PIN code
(Figure 10D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
, use the center button to
M and press the
ETTINGS ENU
9).
, use the center button to
ENU
M and press
ROTECTED ENU
10A).
10C). Repeat this step
"PIN" displays in the upper right corner of the
screen.
Note:
Rotate the key switch to the O
then to the O
N
You have the ability to view and change the settings in
the Protected Menu. Once you access the Protected
Menu, scroll down to Protect Settings option. Use the
right button to change the setting. Setting the Protect
Settings to O
FF
settings in the Protected Menu without entering the
PIN code. Setting the Protect Settings to O
protected options and requires you to enter the PIN
g028523 code to change the setting in the Protected Menu.
After you set the PIN code, rotate the key switch O
and back to the O
feature.
To Set the Auto Idle
•
In the Settings Menu, scroll down to Auto Idle.
•
Press the right button to change the auto idle time
between OFF, 8S, 10S, 15S, 20S, & 30S.
g028522
18
position locks the protected menu.
allows you to view and change the
position to enable and save this
N
position and
FF
hides the
N
FF