Table of Contents
Advertisement
n Saving the screen in whiteboard as an image
The handwritten data in Direct Drawing mode can be saved as an image file (JPEG) in a commercially available USB flash drive
connected to the wireless board.
1. Connect the USB flash drive to the wireless board.
2. Touch "Save" (
) on the toolbar.
The file is saved with the file name "B0000001.jpg" in the "Annotation" folder of the USB flash drive.
(The number in the file name is successively incremented up to 9999999, after which it returns to 0000001.)
Caution
• Set the correct date and time in the monitor.
The monitor date and time is used for the file time stamp. Files will not be given a time stamp if the monitor does not have a
date and time setting.
n Displaying a saved image
Caution
• If data already exists in Direct Drawing mode, the original data will be lost when the new image is displayed.
1. Connect the USB flash drive to the wireless board. (See the description above.)
2. Touch "Open" (
) on the toolbar.
3. Touch the image to be displayed.
35
E
Advertisement
Table of Contents
