Table of Contents
Advertisement
CONETTIX Cellular Communicators
3.2
Install the communicator
Control panel/universal dual path communicator installation
1.
2.
3.
Plug-in communicator interface installation
1.
2.
Bosch Security Systems B.V.
Put the support leg into the support hole labeled X.
Align the PCB metal contacts with the on-board connector.
Push the module into place. The retention clip snaps closed and secures the module in
place.
Insert the communicator into the slot of the plug-in communicator interface.
Push in until you feel it "click" into place.
Installation manual
Installation | en
2022.08 | 01 | F.01U.408.422
9
Advertisement
Table of Contents
