Setting Pauses; Switching Temporarily To Touch Tone Dialing (Dtmf) - Siemens Gigaset A580 User Manual

If an access code is set, the following applies:
u
The access code is added automatically when dialing from the Calls list and
when dialing emergency numbers.
u
When dialing manually and dialing numbers from the directory, you must
add the access code yourself.

Setting pauses

Changing pause after line activity
You can set the length of the pause inserted between pressing the Talk key c
and sending the phone number.
M 4 O L
§Menu§
~
Changing the pause after the Flash key
You can change the length of the pause if your PABX requires this (refer to the
user guide for your PABX).
M 4 O
§Menu§
~

Switching temporarily to touch tone dialing (DTMF)

If your PABX still operates with dial pulsing (DP), but you need touch tone dial-
ing for a connection (e.g. to listen to the network mailbox for your fixed line
network connection), you must switch to touch tone dialing for the call.
Prerequisite: You are currently conducting an external call via the fixed line
network or you have dialed an external fixed line network number or an exter-
nal call is signaled.
§Menu§
Tone dialing
Touch tone dialing is now activated for this call only.
Enter a number for the length of the pause (1 = 1 sec.; 2 = 3 sec.;
3 = 7 sec.) and press
Enter a number for the length of the pause (1 = 800 ms;
2 = 1600 ms; 3 = 3200 ms) and press
Open menu.
Select and press
§OK§
Operating the base station on the PABX
.
§OK§
§OK§
.
.
95