Hitachi ZAXIS 120-6 class Operator's Manual page 94

 Aftertreatment Device Display (2)
Displays condition of the aftertreatment device.
 Power Mode Display (3)
Displays the power mode selected from the switch panel.
 Preheat Display (7)
While the current is being supplied to the glow plug,
indicator (7) is displayed.
 Seat Belt Display (8)
Turns ON when the key switch is in the ON position, and
turns OFF 5 seconds after the engine starts.
Lights when the key is ON and goes off when the seat belt is
fastened.
If the engine is operated without fastening the seat belt
and the pilot control shut-off lever is lowered, the indicator
starts flashing and the buzzer sounds after 5 seconds.
After 30 seconds the buzzer changes from a long to a short
intermittent buzzing.
Fastening the seat belt makes the indicator go off and the
buzzer stop.
 Sub Meter Display (10)
Fuel consumption or breaker hour meter is displayed.
 Radio Display (11)
Displays the radio panel.
 Air Conditioner Display (12)
Displays the air conditioner panel.
 Travel Mode Display (16)
Displays the travel mode selected from the switch panel.
 Auto Shut-Down Display (17)
Display auto shut-down display (17) when auto shut-down
is turned ON from the menu screen.
When the key switch is turned ON while auto shut-down is
enabled, auto shut-down display (17) blinks for 10 seconds.
OPERATOR'S STATION
1-12
2 3
17
16
12
7
8
10
11
MDC1-01-286