Bucket Types And Applications; Specifications - Hitachi ZAXIS 120-6 class Operator's Manual

Bucket Types and Applications

ZX160LC-6
Bucket
Hoe Bucket
Reinforced Hoe Bucket
One Point Ripper
Slope-Finishing Blade
V-type Bucket
Clamshell Bucket
(Shell-push)
f
NOTE:
 Symbols in the above table have the following meanings.
 : General excavating
 : Light duty excavating
 : Rock digging
 : Loading work
 : Slope-finishing work
- : Not applicable (not warrantable)
 Hoe bucket is applicable to the following types of work.
General excavating:
For digging and loading operation of sand, gravel, clay, ordinary earth and so on.
Light duty excavating:
For digging and loading operation of dry, loosened earth, sand, mud and so on.
Their bulk density shall be less than 1.60 t/m
Loading:
For loading operation of dry, loosened earth and sand.
Their bulk density shall be less than 1.10 t/m
Rock digging:
For digging/loading operation of mountain gravels, blasted rock, hard clay, soft rock and so on.
 * Applicable only to 700 mm grouser shoe.
IMPORTANT: Using inapplicable buckets may cause serious damage to the front structure such as boom, arm and
hydraulic cylinders.

SPECIFICATIONS

Bucket Capacity
m
3
PCSA CECE
(Heaped) (Heaped)
0.52 0.45
0.60 0.55
0.70 0.60
0.82 0.7
0.60 0.55
0.70 0.6
-
-
0.4
as a standard.
3
as a standard.
3
Bucket Width
mm
Application
(With side
cutter)
910
1045
1125
1260
1045
1120
-
Bank cutting
1700 (67")
finish
45 °
Bucket width
Side ditching
590
12-8
2.58 m 3.08 m
Arm Arm
 
*



-

*

*

- -
 
 
-
