Table of Contents
Advertisement
PRI318 G (gas heating)
Technical data
Voltage variants/electrical data
3 NAC 380–415 V, 50–60 Hz
Supply voltage
Frequency
Power rating
Required fuse rating (on site)
Connection cable, min. cross-section
Screw thread
Gas connection
Rated heat load
Connector on the appliance as per ISO 7-1
Natural gas connection pressure (as per DIN EN 437)
Threaded union required for natural gas (on site)
Liquid gas connection pressure (as per DIN EN 437)
Threaded union required for liquid gas (on site)
Alternative: precision steel tube as per DIN 2391/DIN 2393 with smooth end (on
site)
Sleeve ½" x ⅜", screw thread: ⅜" x DN 12
Requirements for the gas hose
Vent connection
Diameter of vent connection
Maximum exhaust air temperature (approx.)
Fan power
Fan air output (0 bar)
Maximum permitted pressure loss
20
See installation instructions
See installation instructions
Min. length 40 mm, DN 12
Corrugated metal hose assembly made from stain-
less steel in accordance with DIN 3384 or hose in
accordance with DIN EN 16617 with connections as
3NAC 380-415 V
50–60 Hz
1.0 kW
3 × 16 A
5 x 1.5 mm²
M25
22 kW
½" male thread
½" female thread
½" female thread
per DIN 3384
120 mm
133 °C
0.45 kW
270 m³/h
200 Pa
Advertisement
Table of Contents
