Table of Contents
Advertisement
2 – 3 Basic Foundation
With the common usage of tungsten carbide cutting tools, nowadays, heavy cutting
and quicker spindle speed are desired. This combination may cause vibration easily. In order
to ascertain the best cutting condition, it is necessary to build a sound & good floor f o u
n d a t i o n .
( P l e a s e
r e f e r
t o
f i g u r e
2 - 3 for basic
structure.)
Each individual leveling screw is recommended to have a J-hook bolt foundation made as
displayed on figure 2-3. This design will grip machine soundly to the floor and achieve a
better leveling accuracy. Thus reduces the chance of getting vibration.
2 – 4 Cleaning
The machine is protected with a special anti-rust agent before delivery. Before
operating the machine, please clean all assemblies, especially the slideways, leadscrew,
g e a r r a c k s a n d a l l g r o u n d e d s u r f a c e s w i t h s o f t b r u s h / c l o t h soaked
with cleaning solvent or kerosene.
Do NOT use gasoline or cellulose solvent to clean! This is to avoid danger from fire or
explosion. After removing the anti-rust agent, please lubricate the machine. Next then c
r a n k t h e m o v i n g m e c h a n i s m l i k e t o o l p o s t , t a i l s t o c k b y hand
back & forth within their moving range to test run the assembly.
11
Advertisement
Table of Contents
