Troubleshooting - Panasonic MK-F310 Operating Instructions Manual

Check following points before calling or arranging for repair.
Problem
The appliance does
not turn on.
The appliance does
not operate even when
the rotary switch is
activated.
The appliance
suddenly stops during
operation.
There is abnormal
vibration and noise
during operation.
The texture and
consistency of the
processed ingredients
do not turn out well.
F310_20220808.indb 15 F310_20220808.indb 15

Troubleshooting

Cause and Action
● The plug is loose in the outlet.
➝ Plug in firmly into the outlet.
● The bowl is not properly locked onto the motor housing.
➝Ensure that the triangle mark on the bowl are aligned with the rectangular
mark on the motor housing as seen in page EN8.
● The bowl lid is not fully locked onto the bowl.
➝Fully secure the bowl lid onto the bowl. (P. EN8)
● The ingredients are jammed.
➝Remove the ingredients carefully and ensure that the amount used is as
stated.
● The protection device of overload or overheating is activated.
➝Refer to "Overload and Overheating Protection" for inspection. (P. EN7)
● The safety lock is triggered. (Refer to page EN7)
• Abnormal vibration during operation may offset the safety lock engagement.
➝Ensure that the ingredients used and the amount are as stated.
➝Lock the bowl lid onto the bowl firmly, and ensure that the bow is locked
firmly onto the motor housing.
● The rubber suckers and/or the work top are not clean.
➝Wipe off any dirt or stains with a clean damp cloth. The rubber sucker is only
effective when placed on a clean, smooth and flat surface.
● The ingredients used for processing are either too much or too hard.
➝Ensure that the ingredients used are as stated, reduce the ingredients if it is
over the stated amount.
● Some ingredients might be too difficult to process raw, e.g. pumpkin.
➝Precook might be necessary to soften the ingredients before processing, i.e.
until a fork can easily pierce.
● Ingredient size is not according to the preparation method.
➝Prepare accordingly to follow the size stated.
● Processing certain ingredients at the same time may result in lumps
remaining for frozen function.
● The maximum ingredient amount and processing duration are meant to
serve as a guideline. As a result, lesser ingredient amount and different
ingredients affect the performance.
➝Process the ingredients with a suitable duration till the desired texture and
consistency.
EN15
2022/8/29 18:40:42 2022/8/29 18:40:42