Switching The Burner Rings On/Off - Miele KM400 Series Technical Information

KM400 Series Combi-Sets
4.3.3 Switching the Burner Rings On / Off
Switching on
Press the Control Knob in (for ignition) and turn it to the large
flame symbol. When the flame is visible, hold the knob in for
about 8 seconds before releasing it.
Note
If the flame goes out, repeat the ignition process and hold the
knob pressed in for a little longer.
For KM404: Refer to figure 4-7, the knob can be turned towards the
small flame symbol to the desired setting without being pressed in.
For KM406: Refer to figure 4-8, t
highest to the lowest setting, turn the knob counterclockwise.
Press the knob in briefly and turn it beyond the end stop. The
knob can now be turned further to the desired setting.
Important
Figure 4-7: KM404 Knob
o reduce the flame from the
Flame adjustment is made via the knob from the
12 o'clock position to the 9 o'clock position.
Do Not use the range between 9 o'clock and 12
o'clock to adjust the flame.
Figure 4-8: KM406 Knob
25
Technical Information