Connection Procedure - Epson C31CJ52121 Technical Reference Manual

Enabling in the Software Settings Mode
Select [3. Customize Value Settings] - [13. Other Settings] - [8. Network Tethering] in that order, and then
enable (or disable) it.
See "Software Settings" on page

Connection Procedure

Follow the procedure below to connect a tablet using the tethering function.
1
Connect the printer to a wired network.
2
Turn on the printer, and then wait until the Ethernet LED stops flashing and stays on.
3
On the iOS device, tap [Settings] - [Wi-Fi], and disable Wi-Fi.
78.
Chapter 4 Advanced Usage
109