Bluetooth Device At The Rst; Pair The Earpieces With Another Bluetooth Device; Use Your Headphones - Philips TAT2205 User Manual

Single earpieces pairing
(Mono mode)
Take the right earpieces ("Master
device") from the charging case, the
earpiece will power on automatically.
There will be a voice "Power on" from
right earpieces.
Turn on the Bluetooth function on
your device, search for "Philips
UT102" tap to connect. (Please refer
to P.6)
Philips TAT2205/
TAT2235/TAT2245
Once the pairing succeed, you will
hear a voice "Connected" and the
indicator light will be o .
Pair the earpieces with
another Bluetooth device
If you have another Bluetooth device
that you want to pair with the earpieces,
make sure the Bluetooth function in any
other previously paired or coonected
devices are turned o . Then follow the
steps in 'Pair the earpieces with your
Bluetooth device at the rst time'.
Note
The earpieces stores 1 device in the memory. If
you try to pair more than 2 devices, the earliest
paired device is replaced by the new one.
4 Use your
earpieces
Connect the earpieces to
your Bluetooth device
Turn on the Bluetooth function of
your Bluetooth device.
Take both earpieces from the charging
case, the earpieces will power on and
reconnect automatically.
If no device is connected, the
earpieces will automatically
turn o after 5 mins.
Both earpieces are now
powered on and are paired
with each other automatically.
The earpieces will search the
last connected Bluetooth device
and reconnect to it automatical-
ly. If the last connected one is
not available, the earpieces will
search and reconnect to the
second last connected device.
Tip
The earpieces cannot connect to more than 1
device at the same time. If you have two paired
Bluetooth devices, only turn on the Bluetooth
function of the device that you want to connect.
If you turn on the Bluetooth function of your
Bluetooth device after turning on the earpieces,
you have to go to the Bluetooth menu of the
device and connect the earpieces to the device
manully.
Note
If the earpieces fails to connect to any
Bluetooth device within 5 minutes, it will turn o
automatically to save the battery life.
In some Bluetooth devices, connection may not
be automatic. In this case, you have to go to the
Bluetooth menu of your device and connect the
earpieces to the Bluetooth device manually.