Get Started; Charge The Battery - Philips TAT2205 User Manual

3 Get started

Charge the battery

Note
Before you use your earpieces for the rst
time, place the earpieces in the charging case
and charge the battery for 2 hours for
optimum battery capacity and lifetime.
Use only the original USB charging cable to
avoid any damage.
Finish your call before charging the earpieces,
as connecting the earpieces for charging will
power the earpieces o .
Charging case
Connect one end of the USB cable into
the charging case, and another end into
the power source.
The charging case starts charging.
• Charging process is veri ed by the
blue LED light on the front panel,
• When the charging case is fully
charged, the blue light goes on.
Tip
The charging case serves as a portable backup
battery for charging the earpieces. When the
charging case is fully charged, it supports 3 full
recharge cycle for the earpieces.
Battery LED indicator on
Charging case
While charging earpieces, Blue LED will
light on.
4th blue LED lights ashes once every 1s
and others stay on for 75-100% power
1st and 2nd blue LED lights stay on and 3rd
& 4th lights turn on successively, ashing
once every 1s for 50-75% power
1st blue LED lights stay on and 2nd, 3rd &
4th LED lights turn on successively, ashing
once every 1s for 25-50% power
4 blue LED lights ashing every 1s in
cycles for 0-25% power
Earpieces
Place the earpieces in the charging case.
The earpieces start charging.
• Charging process is veri ed by white
LED light on the earpieces.
• When the earpieces is fully charged,
the white light goes o .
Tip
Normally, a full charge takes 2 hours (for the
earpieces or charging case).