Philips NORELCO 7700 Series Manual page 31

C
C
C
C
3
1
2
Connect the small plug to the SmartClean
1
System. Connect the power plug into any
100V to 240V AC outlet. Use only the
power cord provided.
2. Place the SmartClean System on a flat,
level surface. Make sure the seal has been
removed from the cleaning cartridge (see
'Preparing SmartClean System For Use').
3 Press the top cap down to open the
SmartClean System.
4 Shake off any excess water from shaver
before placing in the SmartClean System.
5 Hold the shaver head side down above the
shaver holder.
Place the shaver into the holder (1), push
6
shaver back (2) and press down the top
cap to connect the shaver (3) (click).
The shaver will only fit in the SmartClean System
in one direction.
ENGLISH
31