List Of Maintenance Console Error Codes - Hitachi EC2-605 Instruction Manual

Attachment 3
● List of Maintenance Console Error Codes
Indication
Note 1) Transmission error:
Console may be restarted by depressing an optional key.
Note 2) Functional selector switch set error:
If this error occurs, check the setting of the functional selector switch. (This error indication will disappear
within several seconds.)
Error content
Illegal modification of the console detected or
fault
Abnormal key intake
ID error of connected machine type (EC1-602
only)
Internal error (ROM)
Abnormal ID detection (EC1-602 only)
Internal error (sum error)
Area code abnormality 1
Area code abnormality 2
Transmission timeout error, see Note 1
Transmission error (Parity error), see Note 1
Internal error
Functional selector switch setup error
(Machine type selection error), see Note 2
Functional selector switch setup error
(Transmission rate setup error), see Note 2
Action
This console cannot be used.
Faulty console. Contact this company for
repair.
Not applicable to other types of elevator.
Abnormal ROM access. Contact this
company for repair.
Not applicable to this elevator.
Abnormal ROM data. Contact this company
for repair.
Connection disabled to the machine types for
operation in Japan.
Connection disabled to the machine types for
foreign countries.
Check if the special cable is correctly
connected.
Check if the special cable is correctly
connected.
Internal abnormality of the console. Contact
this company for repair.
Check the setting of the functional selector
switch.
Check the setting of the functional selector
switch.
27