Disposal Of Packaging Materials; Inserting/Replacing The Batteries - Silvercrest 114047 Operating Instructions Manual

Disposal of packaging materials

GB
The packaging protects the device from damage during
IE
shipment. The packaging materials have been selected
for their environmental friendliness and ease of disposal
and are therefore recyclable.
Dispose of packaging materials which are no longer
needed in accordance with applicable local regulations.

Inserting/replacing the batteries

♦ Open the battery compartment
of the wireless mouse.
♦ Insert 2 x 1.5 V AA batteries into the battery com-
partment
one battery in the lower compartment and then the
second battery in the higher compartment. Ensure
that the paper strip is positioned under the batteries,
this will make future battery exchanges easier.
♦ Close the battery compartment
CAUTION
► Always use batteries from the same manufacturer
and of the same type. Always replace both batteries
at the same time.
10
Returning the packaging to the materials
cycle conserves raw materials and reduces
the amount of waste that is generated.
(observe correct polarity). First place
on the underside
.
SFM 4 A1