Monitoring Alarm Data; Monitoring An Internal Ied Fault - Hitachi 650 Series Operation Manual

Section 7
Operating procedures
7.1.1.2

Monitoring alarm data

Active alarms are indicated by the alarm LEDs and the LED in the Multipage button. The alarms are
configured with PCM600. The alarm type and information depend on the application configuration.
1.
Press
2.
Press
the three alarm pages.
3.
Press
Press
4.
Press
5.
Press
GUID-36A728AD-79C9-48D5-A624-266E2C54C0E6 V1 EN-US
Figure 34:
7.1.1.3

Monitoring an internal IED fault

The flashing green LED indicates an internal IED fault. The fault messages are found in the LHMI
menu.
1. Select Main menu /Diagnostics /Internal events or IED status to monitor the latest fault
indication.
2.
Press
52
to open the alarm view.
or to move between active alarms in the page, or press
to open a dialog box that shows more detailed information about the selected alarm.
or to close the dialog box.
to close the alarm view.
to activate the Clear view and to clear alarms.
Alarm data
or to scroll the view.
© 2017 - 2023 Hitachi Energy. All rights reserved
1MRK500128-UEN Rev. H
GUID-CC3B2CC2-FCE1-4256-A83E-D27AF735C9C2 v4
to switch between
IEC13000248-1-en.vsd
GUID-67B6F8FD-3E2B-4EA6-8822-539F7FA3678B v4
Operation manual
650 series