Logging Off - Hitachi 650 Series Operation Manual

1MRK500128-UEN Rev. H
IEC12000157 V3 EN-US
Figure 15:
7.
Select OK on the on-screen keyboard and press
8.
Select OK in the Log on dialog and press
cancel the procedure.
If the login fails, a message is displayed on the display.
IEC12000158 V4 EN-US
Figure 16:
If a false password is entered three times, the login is blocked for that ID and the following
message is displayed:
IEC13000283 V1 EN-US
Figure 17:
IEC12000160 V2 EN-US
Figure 18:
5.1.3

Logging off

The user is automatically logged off after the display timeout. The IED returns to a state where only
reading is enabled. Manual logoff is also possible.
650 series
Operation manual
IEC12000157-3-en.vsd
Entering the password
Passwords are case sensitive.
Only characters A - Z, a - z and 0 - 9 shall be used in user names. User names are not
case sensitive. For passwords see the Password policies in PCM600.
IEC12000158.vsdx
Error message indicating an incorrect password
IEC13000283-1-en.vsdx
Error message indicating blocked ID
The logon dialog appears if the attempted operation requires another level of user rights.
Once a user is created and written into the IED, login is possible with the password
assigned in the tool. If there is no user created, an attempt to login causes the display to
show a corresponding message.
IEC12000160-2-en.vsd
No user defined
© 2017 - 2023 Hitachi Energy. All rights reserved
to stop editing the password.
to confirm the login, or press
Section 5
Using the HMI
or Cancel to
GUID-0FDDB51B-D1C2-4442-AAE5-865BC39AE253 v1
35