Preparing For Playback; Setting Switches And Menus - Sony DVW-A500P/1 Operation Manual

5-3 Preparing for Playback

5-1 Preparing for Recording

5-3-1 Setting Switches and Menus

Before starting playback, set the switches and menus
as shown in the diagram below.
For details, refer to the pages indicated in the parentheses.
POWER switch: ON
PB level controls:
Playback level
5-3-2 Adjusting the Audio
Playback Level
If the PB level controls on the upper control panel are
pushed in, audio signals are output at the factory-set
level (+4 dBm output for signals recorded at the 0 dB
reference level).
For details on changing the factory-set reference output
level, refer to "1-9. SWITCH SETTINGS ON THE
CONNECTOR PANEL AND BOARDS" in the Installation
Manual.
5-6
Chapter 5 Recording/Playback
Menu settings
ALT/[F2] (PB/EE) buttons in the HOME menu: PB
[F1] (TIMER SEL) button in the TC menu: Select the time data to be displayed.
[F6] (TCG SOURCE) button in the TC menu: int
[F7] (TCG MODE) button in the TC menu: Select the time code to be output. (page 4-21)
Setting switches and menus
To adjust the audio playback level
manually
Pull and rotate the PB level control for the
corresponding channel.
AUDIO INPUT/MONITOR SELECT buttons:
Audio channels to be monitored (page 5-2)
REMOTE buttons: None of
these buttons light up.
PB level controls
To adjust the audio playback level manually