Sony DVW-A500P/1 Operation Manual page 120

Audio
DVW-A500/1
LNG Metal Tape
Frequency
50 Hz to 15 kHz
response (at 10 dB +1.0 dB/–2.0 dB
below refernce
a)
level )
S/N Ratio (at 3% More than 72 dB
distortional level)
Distortion (T.H.D at Less than 1%
1 kHz reference
level a) )
Wow and flutter
AFM
20 Hz to 20 kHz +0.5 dB/–2.0 dB
Frequency
response (at
reference level a) )
S/N Ratio (at 3%
distortional level)
Distortion (T.H.D at
1 kHz reference
level a) )
a) Reference level: + 4 dBm
DVW-A500P
LNG Metal Tape
Frequency
50 Hz to 15 kHz
response (at 20dB
+1.0 dB/–2.0 dB
a)
below peak level )
S/N Ratio (CCIR More than 68 dB
468-3 weighted, at
3% distortional
level)
Distortion (T.H.D at Less than 1%
1 kHz reference
a)
level )
Wow and flutter
(DIN 45507
weighted)
AFM
Frequency 20 Hz to 20 kHz +0.5 dB/–2.0 dB
response (at
a)
reference level )
S/N Ratio (at 3% More than 72 dB (CCIR 468-3
distortional level) weighted)
Distortion (T.H.D at
1kHz reference
a)
level )
a) Reference level: +4 dBm
b) Peak level: +8 dB above reference level
Unless otherwise specified, all values in the above table
were obtained by measuring analog output signals with
Dolby noise reduction circuitry on.
Oxide Tape
50 Hz to 15 kHz
±3.0 dB
More than 50 dB
(Dolby NR off)
Less than 2%
Less than 0.1% rms
More than 85 dB
Less than 0.5%
Oxide Tape
50 Hz to 15 kHz
±3.0 dB
More than 62 dB
Less than 2%
Less than 0.1%
Less than 0.5%
Processor adjustment range
Video level ±3 dB/–∞ to +3 dB selectable
Chroma level ±3 dB/–∞ to +3 dB selectable
Setup/Black level ±30 IRE/±210 mV
Y/C delay ±100 ns (in Betacam playback on
DVW-A500/1 and A500P/1)
Chroma phase ±30°
System phase Sync: ±15 µs
SC: ±200 ns
Input connectors
SERIAL V/A INPUT
BNC (1 with active through out)
Serial digital (270 Mbits/s)
SMPTE 259M/CCIR 656-III
ANALOG I/O VIDEO INPUT
REF.VIDEO: BNC (2 in loop through
connection)
Black burst or composite sync
0.3 Vp-p, 75 Ω, Sync negative
COMPONENT:BNC (3 for 1 set)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω, with
100% color bar for DVW-
A500P/1 and 500P/1 and with
100% or 75% color bar
selectable for
DVW-A500/1 and 500/1
COMPOSITE: BNC (2 in loop through
connection) 1.0 Vp-p, 75 Ω, Sync
negative (with optional BKDW-
505/506)
AUDIO INPUT (AES/EBU) CH-1/2, CH-3/4
XLR, 3-pin, female (2)
AES/EBU format, balanced
AUDIO INPUT CH-1/2/3/4/CUE
XLR, 3-pin, female (5)
LOW OFF: –60 dBu, high
impedance, balanced
HIGH OFF: +4 dBu, high
impedance, balanced
HIGH ON: +4 dBm,600 Ω
termination, balanced
TIME CODE IN XLR, 3-pin, female (1)
0.5 to 18 Vp-p, 10 kΩ, balanced
A-3
Appendix