Hot-Spots On The Pcb; Pcb Anchor Points - Bosch BME280 Mounting Instructions

Bosch Sensortec | HSMI BME280

5.5. Hot-spots on the PCB

Keep a reasonable distance from any hot spots, when placing the sensor device. Hot spots can be for
example other integrated circuits with high power consumption.

5.6. PCB anchor points

Please keep a reasonable distance from any anchor points, where the PCB is fixed at a base plate (e.g.
like a shelf or similar), when placing the sensor device.
Document number BST-BME280-HS006-00 | May 2018
© Bosch Sensortec GmbH reserves all rights even in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third
parties. BOSCH and the symbol are registered trademarks of Robert Bosch GmbH, Germany.
Note: Specifications within this document are subject to change without notice.
18 | 24
Bosch Sensortec