Table of Contents
Advertisement
garden hose connector is not properly
connected, cooling water can leak out and
the engine can overheat during operation.
[ECM01802]
1
1. Fitting
2. Flushing device
EMU36942
Install cowling
1.
Be sure that all cowling lock levers are
released.
2.
Be sure that the rubber seal is seated all
the way around the engine.
3.
Place the cowling on top of the seal.
4.
Check to be sure it fits properly in the
rubber seal.
5.
Move the levers to lock the cowling as
shown. NOTICE: If the top cowling is
not installed correctly, water spray
under the top cowling can damage the
engine, or the top cowling can blow
off at high speeds.
2
ZMU06164
[ECM01992]
After installing, check the fitting of the top
cowling by pushing it with both hands. If the
top cowling is loose, have it repaired by your
Yamaha dealer.
Operation
ZMU06131
ZMU06133
43
Advertisement
Table of Contents
