Polaris RZR XP 1000 EPS Owner's Manual page 30

FEATURES AND CONTROLS
Seats
Before operating the vehicle, always push down on all seat backs to
ensure the latches are secure.
Seat Adjustments
On seats equipped with an adjustment lever under the front edge of the
seat, pull the lever to the left. Slide the seat forward or rearward to the
desired position. Release the lever. The seat will lock into the new
position.
For other seat styles, loosen (do not remove) the four screws located on
the seat bottom. Slide the seat forward or rearward to the desired
position. Tighten the screws to 4 ft. lbs. (5.4 Nm). Do not overtighten.
Seat Removal
1. Pull up on the seat latch
lever located under the rear
edge of the seat.
2. Tilt the seat forward.
3. Lift the seat upward to
remove it from the vehicle.
4. Reverse this procedure to
reinstall the seat. Make
sure the seat tabs at the
front edge of the seat slide
under the seat retainer bar.
5. Press down firmly at the
rear of the seat to engage
the rear latch.
28
Seat Latch
Front Seat Retainer