Toshiba C3PU35 User Manual page 67

Application program cannot be used
Application program
does not work as
expected.
Application program
does not run.
The floppy disk drive cannot be used
FDD lamp does not go
off.
The floppy disk cannot be used
An error message "Write
protected" appears.
An error message
"Unable to create file"
appears.
An error message "Disk
full" appears.
6F8C1118
Q
Symptom
Is the system configuration set
correctly?
Does the application program
support the current operating
system?
Q
Symptom
Q
Symptom
Is the floppy disk write protected?
Is the sub directory created? e.
Is there sufficient disk space?
A
Check
Refer the operation manual of
the application program and
change the system
configuration if instructed.
The application program must
support the current operating
system. Purchase an
appropriate application
program.
A
Check
Wait until the lamp goes off
when processing large data. If
the lamp still does not go off,
quit the task (turn off the power)
and contact the service desk.
A
Check
Take out the floppy disk and
enable it for write.
Create a sub directory and then
create the fil
Delete unnecessary file and
retry.
Use a different floppy disk.
Action
Action
Action
47