Philips SPA2300 Quick Start Manual

SPA2300_QSG_Single_EN.qxd 06-12-2005 13:19 Pagina 1
1 Connect
AUDIO INPUT
AUDIO
R
OUTPUT
R L
5
AC 1
1. Connect the right satellite to the AUDIO OUTPUT/R port of the subwoofer.
2. Connect the left satellite to the AUDIO OUTPUT/L port of the subwoofer.
3. Connect the black plug of the wired remote control to the AUDIO INPUT
port of the subwoofer.
4. Connect the green plug of the wired remote control to the corresponding port of your
audio source (for example, your computer).
5. Connect the power cable from the AC IN socket of the subwoofer to a power supply.
2 Enjoy
1. Set the ON/OFF switch on the rear of the subwoofer to the I position.
> The blue light on the front of the subwoofer comes on.
2. Adjust the bass level with the BASS control on the right side of the subwoofer.
3. Adjust the volume level with the VOLUME control on the wired remote control.
> You can now enjoy the sound of your multimedia speaker system.
All manuals and user guides at all-guides.com
3 4
PC
L
VOLUME
2
Trademarks are property of Koninklijke Philips Electronics N.V. or their respective owners.
Need help?
Online help: www.philips.com/support
Helpline
United Kingdom 0906 1010 016 (£ 0.15)
Specifications are subject to change without notice.
2005 © Koninklijke Philips Electronics N.V. All rights reserved.
www.philips.com
312 247 501 031
EN EN
Multimedia Speaker System
Welcome
Quick start guide
SPA2300
1
Connect
2
Enjoy