Replacing Parts; Overview - Canon imagePRESS P400 Service Manual

Replacing parts

Replacement parts and specifications are subject to change.
Generally, the imagePRESS Server requires no regular service or maintenance. Use the procedures in this chapter to inspect,
remove, reseat, and replace major hardware components.

Overview

This chapter includes information about servicing the following components:
• Boards and cables
• Motherboard components (DIMMs, CPUs, battery)
• Fan
• Power supply
• Storage device
Replacement parts are available from your authorized service/support center. The terms "replace" and "replacing" are typically
used throughout this document to refer to the re-installation of existing components.
Install new components only when necessary. If you determine that a component you removed is not faulty, reinstall it.
NOTE:
Replacement parts and specifications are subject to change. Install the correct parts as directed by your service/support center.
IMPORTANT:
When servicing the imagePRESS Server, follow the precautions listed in Precautions on
For a list of the tools required to service the imagePRESS Server, see Tools required on
■ imagePRESS Server hardware
This section provides illustrations for the imagePRESS Server.
No.
1 Network port (connected to the network)
2 USB3.0 port (x2)
3 Crossover Ethernet port (connected to the printer)
Figure 2: imagePRESS Server connector panel
16
"Precautions" on page
"Tools you will need" on page
Item
3. REPLACING PARTS
3.
3.