Table of Contents
Advertisement
1. Charging/Notification light
2. Headset jack
3. Front camera lens
4. Auxiliary microphone
5. Ear speaker
6. Proximity/Light sensor
7. Volume key/Camera zoom key
8. Power key/Fingerprint sensor
9. Camera key
10. Main loudspeaker
11. Main microphone
Fingerprint functionality is not available in the US market.
Assembly – Single SIM
Your device only supports nano SIM cards. Single SIM devices allow you to use one
SIM card and a memory card.
The nano SIM card and the memory card have separate slots. Make sure you don't
confuse the two.
For information on how to check if your device is Single SIM or Dual SIM, see
Finding the IMEI number(s) of your device on page 15.
To prevent data loss, be sure to turn off your device or unmount the memory card before
you drag out the holder to remove the nano SIM card or memory card from the device.
To insert a nano SIM card and the memory card
Do not cut your SIM card, as this may damage your device.
1
Drag out the SIM card tray.
2
Insert the memory card in the correct orientation into the memory card slot,
as shown in the illustration.
3
Place the SIM card securely in the SIM card tray, as shown in the illustration.
4
Gently push the tray back into the slot until it fits into place.
This is an internet version of this publication. © Print only for private use.
12. Charger/USB Type-C™ cable port
13. Wi-Fi/GPS/Bluetooth® antenna area
14. Main camera lens
15. Flashlight
16. NFC™ detection area
17. Diversity antenna area
18. Nano SIM/Memory card cover
19. Main antenna area
8
Advertisement
Table of Contents
