Table of Contents
Advertisement
To share your mobile connection by One-touch portable hotspot
1
Ensure both devices have the NFC function turned on, and that both screens
are active.
2
Find and tap Settings > Network & Internet > Tethering & portable
hotspot.
3
Tap the Portable hotspot slider to enable the function.
4
Tap One-touch portable hotspot. Hold the devices together so that the NFC
detection areas of each device touch, then tap CONNECT.
This function only works with devices that also support NFC Wi-Fi tethering.
To use your device as a portable Wi-Fi hotspot
1
Find and tap Settings > Network & Internet > Tethering & portable
hotspot.
2
Tap Portable hotspot settings > Configure hotspot.
3
Enter the Network name information.
4
To select a security type, tap the Security field. If required, enter a password.
5
Tap Save.
6
Tap
and tap the Portable hotspot slider to enable the function.
7
If prompted, tap OK to confirm.
portable Wi-Fi hotspot is active.
8
To stop sharing your data connection via Wi-Fi, tap the Portable hotspot
slider to disable the function.
To allow a Wi-Fi Protected Setup-supported device to use your cellular data
connection
1
Ensure your device is functioning as a portable Wi-Fi hotspot.
2
Find and tap Settings > Network & Internet > Tethering & portable hotspot
> Portable hotspot settings.
3
Under Configure hotspot, ensure your portable hotspot is secured by a
password.
4
Tap WPS Push Button, then follow the on-screen instructions. Alternatively,
tap > WPS PIN Entry, then enter the PIN that appears on the Wi-Fi
Protected Setup-supported device.
To rename or secure your Portable Hotspot
1
Find and tap Settings > Network & Internet > Tethering & portable
hotspot.
2
Tap Portable hotspot settings > Configure hotspot.
3
Enter the Network name information.
4
To select a security type, tap the Security field.
5
If required, enter a password.
6
Tap Save.
Controlling Data Usage
You can keep track of the amount of data transferred to and from your device over
your cellular data or Wi-Fi connection during a given period. For example, you can
view the amount of data used by individual applications. For data transferred over
your cellular data connection, you can also set data usage warnings and limits to
avoid additional charges.
If you are using a device that has multiple users, only the owner (that is, the primary user)
can adjust data usage settings. Adjusting data usage settings can help you keep greater
control over data usage but cannot guarantee the prevention of additional charges.
To help reduce data usage
1
Find and tap Settings > Network & Internet > Data usage > Data saver.
2
Tap the slider to enable or disable the function.
This is an internet version of this publication. © Print only for private use.
appears in the status bar when the
51
Advertisement
Table of Contents
