TABLE OF CONTENTS TABLE OF CONTENTS 3 SAFETY INSTRUCTIONS 19 SMART FUNCTIONS IMPORTANT SAFETY INSTRUCTIONS LG ThinQ Application Smart Diagnosis 8 PRODUCT OVERVIEW 22 MAINTENANCE Key Parts and Components Emptying the Water Collection Tank Cleaning the Case 9 INSTALLATION Cleaning the Air Filter...
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USE Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and follow all safety messages. This is the safety alert symbol.
Page 4
Do not tamper with controls. If you detect a strange sound, a chemical or burning smell, or smoke coming from the appliance, unplug it immediately, and contact an LG Electronics Customer Information Center. straight out from the outlet. Do not grasp the power cord or touch the appliance controls with wet hands.
Page 5
If water enters the product, turn off the power at the main circuit, then unplug the product and call for service. If the product has been submerged, contact the LG Electronics Customer Information Center for instructions before resuming use. Unplug the product when unused for long periods.
Page 6
SAFETY INSTRUCTIONS CAUTION To reduce the risk of minor or moderate injury to persons, malfunction, or damage to the product or property when using this product, follow basic precautions, including the following: INSTALLATION Take care when installing the product that exhaust or condensation does not damage nearby property.
Page 7
SAFETY INSTRUCTIONS REFRIGERANT (FOR R32 ONLY) WARNING Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer. The appliance shall be stored in a room without continuously operating ignition sources (for CAUTION associated with older units.
INSTALLATION 9 INSTALLATION WARNING Electrical Data This appliance should be installed in Power cord may include a current interrupter accordance with the National Electrical device. TEST and RESET buttons are provided Code. on the plug case. The device should be tested on Use of extension cords could cause serious TEST button injury or death.
INSTALLATION Wireless Remote Control Before Installation the Air Conditioner Inserting Batteries If the display screen of the remote control begins to fade, replace the batteries. Insert AAA (1.5 V) batteries before using the remote control. Remove the cover on the back of the remote control.
Page 11
INSTALLATION 11 EN Basic Installation Materials Supplied Shape Parts Name Shape Parts Name Mounting plate insu- Hose lation (2 pcs) Window gap insula- Base mounting plate (58 cm, 1 pcs) tion (1 pcs) Extension mounting Fixing clips (2 pcs) plate (40 cm, 1 pcs) Security brackets Extension mounting plate (58 cm, 1 pcs)
INSTALLATION INSTALLATION WINDOW VENT PANEL AND EXTENSIONS The window installation kit allows you to install the air conditioner in most vertical-sliding windows 58 cm to 153 cm wide, or horizontal-sliding windows from 58 cm to 153 cm high. Panel Fig. (58 cm) (40 cm) (58 cm) Window open 58 cm...
INSTALLATION INSTALLATION 13 EN INSTALLATION (VERTICAL) 1 Inserting Panel Assembly Fit the chassis fixing clips at both ends of the After adjusting the length of the mounting plate to the chassis mounting plate. height, insert the clip into the window sill. <Small Windows>...
Page 14
INSTALLATION INSTALLATION 3 Attaching Foam Weather Seals Cut the mounting plate insulation to the chassis Move the mounting plate to the end of the chassis, close the length and insert it on both sides of the mounting plate. window and secure it with the security bracket. Cut the window gap insulation to the window length and insert it into the window gap.
INSTALLATION 15 EN INSTALLATION (HORIZONTAL) 1 Attaching Foam Weather Seals Cut the mounting plate insulation to the chassis length and insert it on both sides of the mounting plate. (Attaching the foam weather seals to the panel assembly rather than the window sash and frame makes for easier cleanup when removing the panel assembly.) •...
Page 16
INSTALLATION 4 Connecting Vent Hose Align the tabs on the diffuser end of the vent hose to the slots in the panel assembly opening. Insert the diffuser and push it in the Lock direction to assemble with the mounting plate. •...
OPERATION 17 EN OPERATION Control Panel and Remote Control Remote Control Auto Swing Incl. auto. Vit. vent. Minuteur Veille Annuler °C ↔ °F (5s) Diagnostic (5s) Power ( Sleep Mode Press to turn the air conditioner ON or OFF This mode keeps operating noise to a minimum and turns the air conditioner off after a set time.
OPERATION NOTE Delay ON/OFF Timer Delay ON - When the air conditioner is off, Auto Restart: In case of turning off the air set it to automatically turn on from 1 to 24 conditioner due to power failure, your unit will hours later, at its previous mode and fan resume its last operation several minutes after settings.
• The appliance supports 2.4 GHz Wi-Fi networks from the LG ThinQ application and register it again. only. To check your network frequency, contact your • The application is subject to change for appliance Internet service provider or refer to your wireless improvement purposes without notice to users.
Page 20
Installing the LG ThinQ Application IC Radiation Exposure Statement Search for the LG ThinQ application from the Google This equipment complies with IC radiation Play Store or Apple App Store on a smartphone. Follow exposure limits set forth for an uncontrolled instructions to download and install the application.
Use this feature to help you diagnose and solve problems with your appliance. • Launch the LG ThinQ application and select the Smart Diagnosis feature in the menu. Follow the instructions for audible diagnosis provided in the LG NOTE ThinQ application.
MAINTENANCE MAINTENANCE Cleaning the Air Filter The air filters should be cleaned every two weeks; depending on indoor air quality, more WARNING frequent cleaning may be needed. A dirty air filter will decrease airflow and reduce efficiency. Before cleaning or performing maintenance, disconnect the power supply and wait until 1.
23 EN TROUBLESHOOTING TROUBLESHOOTING Before Calling for Service The appliance is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the appliance does not function properly or does not function at all, check the following before you call for service.
Page 24
TROUBLESHOOTING Problem Possible Cause Solutions Make sure the air conditioner plug The air conditioner is unplugged. is pushed completely into the outlet. Check the house fuse/circuit The fuse is blown/circuit breaker breaker box and replace the fuse or is tripped. reset the breaker.
Page 25
Set temperature too low. Increase set temperature. Can't connect the Air conditioner is turned off. Turn the air conditioner on. LG ThinQ App. to the air Wireless router is turned off. Turn the router on. conditioner. Move the router closer to the air...
Page 26
TROUBLESHOOTING Wi-Fi Problem Possible Cause Solutions Delete your home Wi-Fi network The password for the Wi-Fi and begin the registration process network was entered incorrectly. again. Turn off the Mobile data on your Mobile data for your smartphone smartphone before registering the is turned on.
Please retain dated receipt or delivery ticket as evidence of the Date of Purchase for proof of warranty (you may be required to submit a copy to LG or authorized representative). If the Date of Purchase cannot be verified, the warranty period will begin 15 months from the date of manufacture.
Page 28
WHETHER BASED ON BREACH OF WARRANTY, BREACH OF CONTRACT, TORT OR OTHERWISE, EVEN IF LG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. IN NO EVENT SHALL LG’S LIABILITY EXCEED THE ACTUAL PURCHASE PRICE OF THE PRODUCT WITH RESPECT TO WHICH ANY CLAIM IS MADE.
Page 29
Limited Warranty. Notice of Dispute. In the event you intend to commence an arbitration proceeding, you must first notify LG in writing at least 30 days in advance of initiating the arbitration by sending a letter to LGECI Legal Team at 20 Norelco Drive, North York, Ontario, Canada M9L 2X6 (the “Notice of Dispute”).
Page 30
WARRANTY Opt Out. You may opt out of this dispute resolution procedure. If you opt out, neither you nor LG can require the other to participate in an arbitration proceeding. To opt out, you must send notice to LG no later than 30 calendar days from the date of the first consumer purchaser’s purchase of the product by either (i) sending an e-mail to optout@lge.com, with the subject line: “Arbitration Opt Out;”...