Ethernet Wan Connection - D-Link DSL-2540U Quick Installation Manual

DSL-2540U

Ethernet WAN Connection

1. Go to the Advanced / Interface grouping page.
2. Select the Enable virtual ports checkbox.
3. Select the choice corresponding to the LAN port that will be used as the
WAN port of the Ethernet WAN port radio button, and click the Save
button.
4. Go to the Net / WAN page and click the Add button.
5. From the Connection Type drop-down list, select the needed value.
From the Port drop-down list, select the value corresponding to the LAN
6.
port that will be used as the WAN port.
7. Specify a name for your connection (any name for easier identification) in
the Name field.
Quick Installation Guide
12