DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi
and Built-in Switch
User Manual
Creating Ethernet WAN Connection
Prior to creating an Ethernet WAN connection, specify a LAN port that will be used as the WAN
port (see the Interface Grouping section, page 95).
Figure 61. The page for creating a new connection. The General settings and Ethernet sections.
Parameter
Provider
Connection Type
Port
Name
Enable
Direction
MTU
MAC
General settings
Leave the Manually value.
A type of network protocol to be used by the connection. Available
values:
PPPoE
•
Static IP
•
Dynamic IP
•
Bridge.
•
Select the value corresponding to the LAN port specified as the
WAN port.
A name for connection for easier identification.
Select the checkbox to enable the connection.
The direction of this connection.
Ethernet
The maximum size of units transmitted by the interface.
A MAC address assigned to the interface.
Page 68 of 138
Configuring via Web-based Interface
Description