Figure 29
1. Tie-down loops
Unloading the Machine
1.
Lower the ramp(s).
2.
Unload the machine from the trailer with the
heavy end up the ramp, carrying loads low
(Figure
30).
•
If the machine has a full load-bearing
attachment (e.g., bucket) or a
non-load-bearing attachment (e.g.,
trencher), back it down the ramp.
•
If the machine has an empty load-bearing
attachment or no attachment, drive it forward
down the ramp.
Figure 30
1. Machine with full
attachment or
non-load-bearing
attachment—back the
machine down the
ramp(s).
g031331
g204458
2. Machine with empty or
no attachment—drive the
machine forward down the
ramp(s).
24