Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Miele PDR 511 SL HP
Summary of Contents for Miele PDR 511 SL HP
- Page 1 Quick Start Guide Commercial tumble dryers PDR 511 SL HP PDR 516 SL EL/G To avoid the risk of accidents or damage to the en-GB machine, it is essential to read these instruc- tions before it is installed and used for the first time.
-
Page 2: Table Of Contents
Contents Warning and Safety instructions ................... Extended documentation ....................Appropriate use ......................... Foreseeable misuse......................Technical safety......................... Gas-heated tumble dryers .................... Correct use........................Description of the machine .................... 10 PDR 511 SL (with heat pump) ................... 10 PDR 516 SL (electrically heated) ..................11 PDR 516 SL (gas heated) ....................12 Operating the tumble dryer .................... - Page 3 Contents Connectivity ........................32 Pairing instructions......................32 Technical data ........................33 Optional accessories ...................... 34 Communication box ......................34 XKM 3200 WL PLT ......................34 Payment device ......................... 35 Technical data........................36 Technical data ........................36...
-
Page 4: Warning And Safety Instructions
Miele cannot be held liable for damage caused by non-compliance with these instruc- tions. Keep these operating instructions in a safe place and pass them on to any future owner. -
Page 5: Foreseeable Misuse
Foreseeable misuse Do not make any alterations to the tumble dryer, unless authorised to do so by Miele. Do not lean on the tumble-dryer door. Otherwise, the tumble dryer may tip over, causing injury to yourself or others. -
Page 6: Technical Safety
Technical safety This tumble dryer must only be set up and commissioned by a Miele Service technician or authorised Miele Service Dealer. Before installation check the tumble dryer for any obvious damage. A damaged tumble dryer must not be installed and/or used. - Page 7 If the appliance is hard wired, adequate provision must be made on site to switch off all poles to disconnect the tumble dryer from the power supply. If the mains connection cable is faulty it must always be replaced by a Miele authorised technician to protect the user from danger. ...
-
Page 8: Gas-Heated Tumble Dryers
Warning and Safety instructions - Shafts that are used to ventilate installation rooms with fireplaces. - Flues that are used by third parties. Smoke or exhaust gas that is fed back into the flue or shaft may be toxic. Regularly check all components in the vent ducting (e.g. -
Page 9: Correct Use
Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, warranty, performance and product liability claims will be invalidated. -
Page 10: Description Of The Machine
Description of the machine PDR 511 SL (with heat pump) Control panel Rotary control Turn the rotary control to switch on the tumble dryer and select the drying programme. Drum door The drum door is opened by pulling the door handle. Fluff filter compartment cover with handle The fluff filter compartment cover is opened by turning the handle. -
Page 11: Pdr 516 Sl (Electrically Heated)
Description of the machine PDR 516 SL (electrically heated) Control panel Rotary control Turn the rotary control to switch on the tumble dryer and select the drying programme. Drum door The drum door is opened by pulling the door handle. Fluff filter compartment cover with handle The fluff filter compartment cover is opened by turning the handle. -
Page 12: Pdr 516 Sl (Gas Heated)
Description of the machine PDR 516 SL (gas heated) Control panel Rotary control Turn the rotary control to switch on the tumble dryer and select the drying programme. Drum door The drum door is opened by pulling the door handle. Fluff filter compartment cover with handle The fluff filter compartment cover is opened by turning the handle. -
Page 13: Operating The Tumble Dryer
Activates the Intermittent fan operation to perfectly dry light fabrics, e.g. bed linen and cloths. The function is deactivated as a factory default setting and can only be activated and set by the Miele Customer Service Department. Time display Displays the remaining programme running time in hours and minutes. -
Page 14: Drying Levels
Operating the tumble dryer Drying levels - sensor control = “Normal plus” - sensor control = “Normal” - sensor control = “Hand iron” - sensor control = “Machine iron” - sensor control: “Duvets” function - position = “Cottons” programme Drying pro- grammes For drying cotton and linen fabrics. -
Page 15: Machines With Time Control (Top)
Activates the Intermittent fan operation to perfectly dry light fabrics, e.g. bed linen and cloths. The function is deactivated as a factory default setting and can only be activated and set by the Miele Customer Service Department. Time display Displays the remaining programme running time in hours and minutes. -
Page 16: Temperature Settings (Top)
Operating the tumble dryer Temperature set- - sensor control = “high” temperature setting tings (TOP) - sensor control = “medium” temperature setting - sensor control = “low” temperature setting - sensor control = “cool” temperature setting Timed pro- - position 5 = Timed programme 5 minutes grammes - position 10-55 = Timed programme 10–55 minutes - position 60 = Timed programme 60 minutes... -
Page 17: Machines With Payment Systems (Cop)
Activates the Intermittent fan operation to perfectly dry light fabrics, e.g. bed linen and cloths. The function is deactivated as a factory default setting and can only be activated and set by the Miele Customer Service Department. Time display Displays the remaining programme running time in hours and minutes. -
Page 18: Drying Programmes
Operating the tumble dryer Drying pro- - position range = cool temperature setting grammes For airing fabrics. - position range = “low” temperature setting For drying delicates made from artificial silk or synthetic fibres. - position range = “medium” temperature setting For drying easy-care synthetics and mixed fibres. -
Page 19: How The Control Field Works
Operating the tumble dryer How the control field works The sensor controls react to fingertip contact. If a sensor control is lit, it can be selected. If a sensor control is brightly lit, this means it is currently selected. If a sensor control is dimly lit, this means it can be selected. Sensor controls After selecting a drying level programme with the programme se- for the drying... -
Page 20: Drying
Drying 1. Notes on correct laundry care Washing before Heavily soiled laundry must be washed particularly thoroughly. Use drying sufficient detergent and select a high wash temperature. If in doubt, wash the items several times. The tumble dryer must not be used for drying items of laundry which have been cleaned using industrial chemicals. - Page 21 Drying Damage due to foreign objects which were not removed from the laundry. Foreign objects in the laundry can melt, burn or explode. Ensure that any foreign objects (e.g. detergent dispensing aids, lighters, etc.) have been removed from the laundry. Check seams and stitching to ensure that the items of laundry are in- tact.
-
Page 22: Loading The Tumble Dryer
Drying 2. Loading the tumble dryer Loading the laun- Damage to fabrics caused by incorrect laundry care. Incorrect laundry care can damage fabrics during tumble drying. Before loading the dryer, read “1. Notes on correct laundry care”. Open the door. ... -
Page 23: Selecting A Programme
Drying 3. Selecting a programme Selecting a pro- The tumble dryer is switched on by selecting a programme and gramme switched off by turning the programme selector to the position. Turn the programme selector to the required programme. A drying level may also light up and durations will appear in the time display. -
Page 24: Selecting The Delay Start Function
Drying The drying result is preset by the tumble dryer and cannot be altered. Selecting the With Delay start, you can delay the start of a programme from Delay start func- minutes up to (hours). tion ... -
Page 25: Starting A Programme
Drying 4. Starting a programme Starting a pro- Touch the flashing Start/Stop sensor control. gramme The Start/Stop sensor control will light up. Programme sequence - If Delay start has been selected, the Delay start time will start to count down first. - The programme starts. -
Page 26: Unloading Laundry From The Tumble Dryer
Drying 5. Unloading laundry from the tumble dryer End of the pro- The tumble dryer can be configured so that a buzzer sounds at the gramme end of the programme. At the end of the programme ( is indicated on the time display), the laundry has cooled down and can be removed. -
Page 27: Programme Overview
Programme overview “Label” programme package Programme name Suitable Selectable Activatable Maximum fabrics drying levels extras load size (residual moisture in %) Cotton items with normal - Machine iron Cottons residual moisture (40 %) - Hand iron (25 %) - Anti-crease* - Normal (0 %) - Normal plus... -
Page 28: Standard" Programme Package
Programme overview “Standard” programme package Programme name Suitable Selectable Activatable Maximum fabrics drying levels extras load size (residual moisture in %) Single and multi-layer - Machine iron Cottons cotton/linen items (40 %) - Hand iron (25 %) PDR 511: 11 kg - Anti-crease* PDR 516: 16 kg - Normal (0 %) -
Page 29: Changing The Programme Sequence
Changing the programme sequence Changing a programme once it has started You cannot change to another programme once a programme has started (this prevents unintentional alterations). You will need to can- cel the current programme before you can select a new one. ... -
Page 30: Time Left
Changing the programme sequence Adding laundry during ongoing Delay start period You can open the door to add or remove laundry. - All programme settings will be saved. - You can change the drying level, if required. Open the door. ... -
Page 31: Problem-Solving Guide
Problem-solving guide . . . With the help of the following notes minor faults in the performance of the appliance, some of which may result from incorrect operation, can be put right without contacting the Ser- vice Department. Repair work to electrical appliances should only be carried out by a suitably qualified person in strict accordance with current local and national safety regulations. -
Page 32: Connectivity
Press and hold the sensor control until appears briefly on the display. A timer will then start. The tumble dryer now opens the soft AP. Establish the connection with the Device Connector in Miele MOVE. Once a connection is established, dots flash in the word. -
Page 33: Technical Data
Connectivity Establishing the network connection using a LAN cable The optional XKM 3200 WL PLT communication module is required for wired network connection. On the supervisor level, select using the or arrow buttons. Then select the COM module using the or arrow buttons. ... -
Page 34: Optional Accessories
Optional accessories Optional accessories for this tumble dryer are available from your Miele dealer or from the Miele Customer Service Department. Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, warranty, performance and product liability claims will be invalidated. -
Page 35: Payment Device
Copyright and licences For the purpose of operating and controlling the communication module, Miele uses pro- prietary or third-party software that is not covered by open source licensing terms. This software/these software components are protected by copyright. -
Page 36: Technical Data
Technical data Technical data PDR 51x SL Height 1800 mm Width 711 mm Depth 1075 mm Depth with door open 1760 mm Net weight with heat pump 193 kg Electrically heated 146 kg Gas heated 150 kg Drum volume PDR 511: 200 l PDR 516: 300 l Maximum load size (dry weight) PDR 511: 11 kg PDR 516: 16 kg Supply voltage See data plate... - Page 38 United Kingdom Malaysia Miele Sdn Bhd Miele Co. Ltd., Fairacres, Marcham Road Suite 12-2, Level 12 Abingdon, Oxon, OX14 1TW Menara Sapura Kencana Petroleum Professional Sales, Tel: 0845 365 6608 Solaris Dutamas No. 1, Jalan Dutamas 1 E-mail: professional@miele.co.uk 50480 Kuala Lumpur, Malaysia Internet: www.miele.co.uk/professional...