Table of Contents
Advertisement
replacing the fuse in the side-mounted power outlets (some models only)
The two side-mounted power outlets (some models only) are internally fused with one
16 A fuse. Be careful not to overload them as this will blow the fuse.
ImpORTANT!
The power socket outlets on these cookers are
rated at 250v 10A AC only.
If required, the fuse can be replaced by following
these steps:
1 Turn the power to the cooker off at the wall.
!
Electrical Shock Hazard
Before accessing the fuse, ensure that
the cooker has been disconnected
from the power supply.
failure to do so could result in death
or electric shock.
2 Unscrew the anti-tip brackets, then pull the cooker out from
the wall, so the back fuse cover on the right-hand side
is accessible.
3 Remove the screw holding the fuse cover in place and
remove the fuse cover.
4 Open the fuse housing, as shown, and remove the blown
fuse cartridge.
5 Slide in the replacement fuse cartridge. Ensure that it is
rated 16 A. (Two replacement fuse cartridges are supplied
with the cooker.)
6 Close the fuse housing.
7 Refit the fuse cover.
8 Push the cooker back into position.
9 Refit the anti-tip brackets.
!0 Turn the power to the cooker back on at the wall
and set the clock.
Tipping Hazard
All cookers can tip. Keep children away and take care. The anti-tip
brackets supplied must be installed.
failure to follow these instructions could result in injury.
CArE ANd CLEANiNg
wArNiNg!
wArNiNg!
!
29
Advertisement
Table of Contents
