Safety - Husqvarna 2-20DT Operator's Manual

Use an approved respiratory protection.
Use approved hearing protection.
Use approved eye protection.
Use approved protective gloves.
Use approved protective boots.
This product is in compliance with
applicable EU directives.
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.
Type plate
1 2
13
12
11
10
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
2037 - 002 - 06.04.2023
3 4
5
6
7
8
XX
XX
9
Used if there is a risk of
1. Product number
2. Product weight
3. Rated power
4. Rated voltage
5. Enclosure
6. Rated current
7. Frequency
8. Maximum slope angle
9. Manufacturer
10. Scannable code
11. Production year
12. Model
13. Serial number
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.

Safety

if the instructions in the manual are not
obeyed.
CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Used if there is a risk of
5