Husqvarna 2-20DT Operator's Manual page 15

Abrasive separator
The abrasive separator makes the abrasive free
from contamination. The abrasive separator holds the
abrasive and supplies the blastwheels with abrasive.
The separator tray keeps contamination away from the
abrasive and the blastwheels.
To fill the product with abrasive
WARNING:
protective equipment during operation. Refer
Personal protective equipment on page 7 .
to
1. Make sure that the abrasive valve is closed. Rfer to
To operate the abrasive valves on page 13 .
2037 - 002 - 06.04.2023
Always use personal
2. Lift the handle to open the separator.
3. Open the separator tray and remove all
contaminations when you fill abrasive or when
necessary.
4. Fill the separator with abrasive up to the separator
tray. Fill abrasive when necessary.
To connect a dust extractor
WARNING:
extractor if the dust extractor hose is
damaged. The risk increases that you
breathe in dust that is dangerous to your
health. Use approved respiratory protection.
1. Examine the dust extractor hose for damages.
2. Make sure that the filters in the dust extractor are
clean and not damaged.
Do not use the dust
15