NetCol8000-C(070, 130, 190) In-room Chilled Water
Smart Cooling Product
User Manual
from the communications ports on other faulty fans. message is displayed.
Then tap Yes. The command is triggered successfully and the alarm is cleared.
Step 12 Power on the device, tap Start on the home screen, choose Maintenance >
Startup Wizard, and commission the indoor fan to check that it works properly
before you exit.
Step 13 Install the fan maintenance baffle and close the front door.
Step 14 On the home screen, choose Maintenance > Performance Maintenance to enter
the Performance Maintenance screen and clear the runtime of the indoor fan.
----End
6.4.2 Replacing an Air Filter
6.4.2.1 Replacing an Air Filter (Upflow)
Context
Tool: Phillips screwdriver
Procedure
Step 1 Open the cabinet front door.
● Each module has four filters.
● Install the air filter based on the air flow direction indicated on the frame.
Step 2 Remove the sheet metal fastener from the air filter using a Phillips screwdriver,
hold the handle and pull out the air filter.
Figure 6-13 Removing an upflow air filter
Issue 09 (2022-12-15)
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
6 Maintenance
154